SICK 1078009 MQ10-60ANSKT0 NPN Magnetic Proximity Sensor

USD 74.10

With MAG-3010-B in non-magnetic mounting material: 0–60 mm sensing, 1 mT sensitivity, NPN normally-open output, 1,000 Hz and an M8 connector.

SKU SICK-1078009 Category
SICK MQB

SICK MQ10-60ANSKT0 NPN Magnetic Proximity Sensor

BrandSICK
Model IdentifierMQ10-60ANSKT0
Official Part Number1078009

Technical Overview

The SICK MQ10-60ANSKT0 is a rectangular magnetic proximity sensor with an NPN normally-open output and 1 mT magnetic sensitivity. Its 0–60 mm nominal sensing range is specified with a MAG-3010-B (M4.0) magnet and installation in non-magnetic material; the assured range is 48.6 mm. Switching frequency is 1,000 Hz, with continuous output current up to 200 mA. The three-wire DC circuit uses an M8 three-pin connector and a 10–30 V supply, consuming 5 mA without load. VISTAL plastic forms both the housing and sensing face, with IP67 protection and −25 to +75 °C operation. A 270° LED indicator assists local observation, and two 3.2 mm holes support fastening.

Magnetic proximity sensor with 1 mT sensitivity, NPN normally-open output, 1,000 Hz switching and M8 three-pin connector.

Key Features

  • MQ10-60ANSKT0 / 1078009: rectangular magnetic proximity sensor
  • 0–60 mm nominal range with MAG-3010-B (M4.0), mounted in non-magnetic material
  • 48.6 mm assured sensing range; 1 mT magnetic sensitivity
  • NPN normally-open output; DC three-wire circuit
  • 1,000 Hz switching; continuous current ≤200 mA
  • 10–30 V DC; 5 mA without load; availability delay ≤26 ms
  • M8 three-pin connector
  • Reverse-polarity, short-circuit and power-up pulse protection
  • VISTAL plastic housing and sensing face; IP67; −25 to +75 °C operation
  • 270° LED indicator; two Ø3.2 mm mounting holes

Use a defined magnet target and an NPN normally-open signal to report contactless position or passage conditions to external machine logic.

Technical Specification Matrix

ParameterValue
Functional principleMagnetic proximity sensing
Housing designRectangular
Nominal sensing range Sn0–60 mm with MAG-3010-B (M4.0); installation in non-magnetic material
Assured sensing range Sa48.6 mm
Magnetic sensitivity1 mT
Switching frequency1,000 Hz
Switching outputNPN normally open (NO)
Electrical wiringDC three-wire
ConnectionM8 three-pin connector
Pin or wire assignmentCD-002: 1 BN=L+; 4 BK=NO output; 3 BU=M
Power supply10–30 V DC
Ripple≤10% of supply voltage
Voltage drop≤1.5 V at maximum continuous current Ia
Current consumption5 mA without load
Availability delay≤26 ms
Hysteresis1–10%
Reproducibility≤1% of Sr at constant supply voltage and ambient temperature
Temperature drift±10% of Sr
Continuous current Ia≤200 mA
Protection functionsReverse-polarity protection; short-circuit protection; power-up pulse protection
Housing materialVISTAL plastic
Sensing face materialVISTAL plastic
IP ratingIP67 to EN 60529
Operating temperature−25 to +75 °C
Shock resistance30 g, 11 ms
Vibration resistance10–55 Hz, 1 mm
EMCEN 60947-5-2
MountingTwo Ø3.2 mm holes; 22.2 mm center spacing
IndicationLED indicator, 270° visibility
Reference magnet range diagramMaximum Sn with flush or non-flush installation in non-magnetizable material: MAG-3315-B / 7902086 68 mm; MAG-3015-B / 7901786 68 mm; MAG-3010-B / 7901785 60 mm; MAG-2006-B / 7901784 36 mm; MAG-0625-A / 7901783 24 mm; MAG-1003-S / 7901782 23 mm
MTTFD1,924 years
DCavg0%
Mission time20 years

Industrial Applications

1. Confirming a magnet-equipped carriage at its docking position

A carriage can carry a MAG-3010-B magnet facing the fixed sensor when it reaches a docking position. The NPN normally-open output gives external sequencing logic an arrival reference. Setup uses non-magnetic mounting material for the documented range and establishes a repeatable gap within the assured sensing distance, accounting for alignment, hysteresis and the actual mechanical travel.

Problem Solved

A contactless magnet-position condition helps external sequencing logic distinguish a docked carriage from travel outside the sensing region before coordinating the next transfer operation.

Carriage docking Defined magnet target NPN normally open

2. Counting magnet-equipped carriers past a fixed station

Separated carriers can each carry a defined magnet past a fixed sensing location. Entry and departure of the magnetic target change the NPN normally-open state for an external counter. Commissioning checks carrier spacing and speed against the 1,000 Hz rating, while magnet selection, gap and non-magnetic mounting material establish the documented detection arrangement.

Problem Solved

Separated magnetic-target transitions give external counting logic carrier-passage events, helping track movement at one station without physical contact between the sensor and carrier.

Carrier counting 1,000 Hz Magnetic target

3. Monitoring an extended dwell at a magnet-equipped fixture

A fixture can bring its attached magnet opposite the sensor during a normal holding stage. External timing logic measures how long the NPN normally-open condition persists and compares it with the expected process interval. Commissioning establishes the magnet gap in non-magnetic mounting material and accounts for hysteresis so the intended holding position gives a consistent occupancy reference.

Problem Solved

A maintained magnetic-target condition gives external timing logic a dwell reference, helping identify a fixture that remains at the sensing position beyond its expected process interval.

Fixture dwell External timer Contactless occupancy
Select your currency