SICK 1059040 AFM60A-S1NB018x12 PROFINET Absolute Encoder

USD 1,150.76

AFM60A-S1NB018x12 provides 18-bit singleturn and 12-bit multiturn position, PROFINET Class 3 communication, ≤1 ms cycle time and a 6 mm solid shaft.

SKU SICK-1059040 Category
SICK Encoders

SICK AFM60A-S1NB018x12 PROFINET Absolute Encoder

BrandSICK
Model IdentifierAFM60A-S1NB018x12
Official Part Number1059040

Technical Overview

The SICK AFM60A-S1NB018x12 is an absolute rotary encoder with a 6 mm solid shaft, shaft flat and servo flange. It resolves up to 262,144 steps per revolution across 4,096 revolutions, combining 18-bit singleturn and 12-bit multiturn position. PROFINET communication uses encoder profile V4.1 Class 3 and a cycle time no greater than 1 ms, with configurable resolution, preset, counting direction and round-axis functionality. Diagnostic data includes temperature extremes, maximum speed, operating hours, movement counts and maximum supply voltage. One axial A-coded M12 male connector supplies power, while two axial D-coded M12 female connectors provide network ports. The aluminum housing operates from −40 to +85 °C, with speed-related self-heating allowance and separate shaft-side and housing-side enclosure ratings.

PROFINET absolute encoder with 18-bit singleturn × 12-bit multiturn resolution, ≤1 ms cycle time, servo flange and a 6 mm solid shaft.

Key Features

  • 262,144 steps per revolution, 18 bit; 4,096 revolutions, 12 bit
  • PROFINET; encoder profile V4.1 Class 3; 10/100 Mbit/s
  • Cycle time ≤1 ms; 6 s initialization time
  • Configurable resolution, preset, counting direction and round-axis functionality
  • Diagnostics for temperature, speed, operating hours, movement counts and supply voltage
  • 6 mm solid shaft with flat; 10 mm shaft length; servo flange
  • One axial M12 four-pin A-coded power connector; two D-coded female network ports
  • 10–30 V DC; ≤3 W without load; reverse-polarity protection
  • Operating speed ≤9,000 rpm; allow 3.3 K self-heating per 1,000 rpm
  • Aluminum housing/flange; IP65 shaft side and IP67 housing side with mating connector fitted

Provide high-resolution singleturn and multiturn position through PROFINET, with configurable round-axis scaling and operating diagnostics for external machine control.

Technical Specification Matrix

ParameterValue
Functional principleAbsolute rotary encoder
Mechanical designSolid shaft; servo flange
Singleturn resolutionMaximum 262,144 steps per revolution, 18 bit
Multiturn range4,096 revolutions, 12 bit
Maximum combined resolution18 bit ×12 bit; 262,144 ×4,096
Error limits G0.03° to DIN ISO 1319-1; symmetric upper/lower error-limit position, dependent on installation
RepeatabilityStandard deviation σr =0.002° to DIN ISO 55350-13; 68.3% of measured values within specified interval
Communication interfacePROFINET
Encoder profileV4.1 Class 3
Data transmission rate10 / 100 Mbit/s
Transmission mediumCAT-5e cable
Initialization time6 s
Cycle time≤1 ms
Configurable parametersSteps per revolution; number of revolutions; PRESET; counting direction; speed-calculation sampling rate; speed-output unit; round-axis functionality
Diagnostic dataMinimum/maximum temperature; maximum speed; power-on counter; operating hours power-on/motion; direction-change and CW/CCW movement counts; maximum supply voltage
Power supply10–30 V DC
Power consumption≤3 W without load
Electrical protectionReverse-polarity protection
Power connectionOne axial M12 four-pin A-coded male connector
Network connectionsTwo axial M12 four-pin D-coded female connectors, Port 1 / Port 2
Power pin assignment1 BN=10–30 V supply; 2 WH=not assigned; 3 BU=GND; 4 BK=not assigned; do not use pins 2 and 4
Network pin assignmentEach port: 1 YE=TxD+; 2 WH=RxD+; 3 OG=TxD−; 4 BU=RxD−
Local controls and indicatorsPreset push-button; SF, BF, L/A1, L/A2 and Encoder indicators; decimal switches are out of operation
ShaftStainless steel; Ø6 mm with flat; length 10 mm
Flange materialAluminum
Housing materialAluminum
Startup torque0.5 Ncm at +20 °C
Operating torque0.3 Ncm at +20 °C
Permissible shaft load80 N radial; 40 N axial
Operating speed≤9,000 rpm; allow self-heating of 3.3 K per 1,000 rpm when defining operating-temperature range
Rotor inertia6.2 gcm²
Bearing lifetime3 ×10^9 revolutions
Angular acceleration≤500,000 rad/s²
Mounting holesThree M4 holes, 8 mm deep, at 120° on Ø42 ±0.05 mm circle
Shaft-side enclosure ratingIP65, IEC 60529
Housing-side enclosure ratingIP67, IEC 60529, with mating connector fitted
Relative humidity90%; condensation not permitted
Operating temperature−40 to +85 °C; account for speed-related self-heating
Storage temperature−40 to +100 °C without packaging
Shock resistance100 g, 6 ms, EN 60068-2-27
Vibration resistance30 g, 10–2,000 Hz, EN 60068-2-6
EMCEN 61000-6-2 and EN 61000-6-3
MTTFD80 years to EN ISO 13849-1; standard product, not a safety component; calculation at nominal component load, +40 °C average and 8,760 h/year, treating electronic failures as hazardous
Physical Weight (kg)0.2

Industrial Applications

1. Tracking position over multiple turns of a coupled mechanism

A mechanism requiring position across several shaft revolutions can couple to the 6 mm solid shaft and read the singleturn and multiturn values through PROFINET. The 18-bit step resolution and 12-bit revolution range establish the encoder position representation. External control converts shaft rotation to machine travel using the actual coupling or transmission ratio, while error assessment accounts for mounting and the documented angular limits.

Problem Solved

Combined within-turn position and revolution count give external machine control a rotary position reference across multiple turns, supporting travel tracking through a defined mechanical transmission.

Multiturn position 18 ×12 bit PROFINET

2. Scaling the position of a repeating rotary station

A rotary station can use configurable steps per revolution, preset, counting direction and round-axis functionality to align encoder values with its repeating machine cycle. External control applies the required position scale and reads it at the configured network cadence. The ≤1 ms encoder cycle time and 6 s initialization specification inform startup and cyclic-data handling for the installed control arrangement.

Problem Solved

Configurable position scaling gives external station control a reference matched to its repeating rotary cycle, helping coordinate machine positions without replacing the encoder for each scale requirement.

Round-axis scaling Preset ≤1 ms cycle

3. Observing operating conditions during maintenance

A maintenance system can collect the encoder diagnostic records through the PROFINET integration and compare operating-hour, movement and direction-change counts over time. Minimum and maximum temperature, maximum speed and maximum supply voltage add operating-condition context. External monitoring decides which trends need investigation; these records describe observed usage and conditions rather than diagnosing a specific mechanical fault by themselves.

Problem Solved

Recorded usage counts and operating extremes give maintenance monitoring a consistent condition history, supporting investigation of unusual temperature, speed or motion patterns alongside the machine service record.

Operating diagnostics Usage counters Condition history
Select your currency