SICK 6041819 VL180-2P42431 PNP Retro-reflective Sensor

USD 74.62

VL180-2P42431 offers polarized red-light sensing, 0.05–6 m PL80A range, PNP output, 270° sensitivity adjustment, M12 connection and P250 reflector.

SKU SICK-6041819 Category
SICK V180-2

SICK VL180-2P42431 PNP Retro-reflective Sensor with Reflector

BrandSICK
Model IdentifierVL180-2P42431
Official Part Number6041819

Technical Overview

The SICK VL180-2P42431 is an axial polarized dual-lens retro-reflective sensor with a PNP output. With PL80A, sensing spans 0.05–6 m and maximum range is 0.05–7 m. The supplied P250 reflector provides 0.05–4.5 m sensing and 0.05–6 m maximum range. Its 645 nm red LED produces a 400 mm spot at 6 m, with approximately 4.5° dispersion. A 270° potentiometer adjusts sensitivity; an L/D control input selects output behavior, with an open control wire giving dark switching. Response is no more than 0.5 ms with resistive load, with 1,000 Hz switching at a 1:1 light/dark ratio. The IP67 nickel-plated brass/PC and PMMA device uses 10–30 V DC, an M12 four-pin connector and M18 × 1 mounting. Two metal fastening nuts are supplied.

Axial M18 retro-reflective sensor with PNP output, 270° sensitivity adjustment, L/D control input, M12 four-pin connector and supplied P250 reflector.

Key Features

  • Axial polarized dual-lens retro-reflective sensing; minimum reflector distance required
  • PL80A: 0.05–6 m sensing; 0.05–7 m maximum range
  • Supplied P250: 0.05–4.5 m sensing; 0.05–6 m maximum range
  • 645 nm red LED; Ø400 mm spot at 6 m; approximately 4.5° dispersion
  • 270° sensitivity potentiometer
  • PNP output; ≤100 mA; L/D control input, open wire gives dark switching
  • ≤0.5 ms response with resistive load; 1,000 Hz at 1:1 light/dark ratio
  • 10–30 V DC; 30 mA without load; M12 four-pin male connector
  • nickel-plated brass/PC housing; PMMA optics; IP67; M18 × 1 thread
  • P250 reflector and two metal fastening nuts, 24 mm across flats, supplied

Adjust the reflected-beam detection path with the supplied P250 reflector and select PNP light/dark behavior through the L/D control input for external process logic.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensor
Optical designAxial polarized dual-lens system; minimum reflector distance required
Sensing range0.05–6 m with PL80A; 0.05–4.5 m with supplied P250
Maximum sensing range0.05–7 m with PL80A; 0.05–6 m with P250
Reflector rangesSensing / maximum: PL80A 0.05–6 / 0.05–7 m; P250, PL40A, PL50A and C110A 0.05–4.5 / 0.05–6 m; PL30A and PL31A 0.05–3.5 / 0.05–4.5 m; PL20A 0.05–2.3 / 0.05–3 m; P45 0.05–1.8 / 0.05–2.2 m; Diamond Grade tape 0.1–1.4 / 0.1–1.8 m
Light sourceVisible red LED
Wavelength645 nm
Light spot sizeØ400 mm at 6 m
LED service lifeAverage 100,000 h at ambient +25 °C
Focus / dispersion angleApproximately 4.5°
AdjustmentSensitivity potentiometer, 270°
Switching outputPNP
Switching modeLight/dark switching via L/D control input; open control wire gives dark switching (D.ON)
Signal voltage HIGH/LOWApproximately supply voltage −1.8 V / 0 V
Output current≤100 mA
Response time≤0.5 ms with resistive load
Switching frequency1,000 Hz at 1:1 light/dark ratio
Power supply10–30 V DC; limit values in a short-circuit-protected network, maximum 8 A
Ripple±10%; remain within supply tolerances
Current consumption30 mA without load
ConnectionM12 four-pin male connector
Pin assignmentCD-087: 1 BN=L+; 2 WH=L/D; 3 BU=M; 4 BK=Q
Circuit protectionA: supply reverse-polarity protection; B: inputs and output reverse-polarity protection; D: outputs overcurrent and short-circuit protection
Protection classIII
Housing materialNickel-plated brass and PC
Optics materialPMMA plastic
Mounting threadM18 × 1
IP ratingIP67
Items suppliedP250 reflector; two metal fastening nuts, 24 mm across flats
IndicatorsOrange: switching output active; green: strength indicator
Operating temperature−25 to +55 °C
Storage temperature−40 to +70 °C
UL filesNRKH2.E300503 and NRKH8.E300503
MTTFD2,006 years
DCavg0%
Housing axial extent70.2 mm; partial mechanical size
Physical Weight (kg)0.047

Industrial Applications

1. Counting separated cartons across a conveyor

A conveyor can position the sensor and a suitable reflector on opposite sides of a load path so opaque cartons interrupt the returned red beam. External counting logic evaluates the PNP signal. Commissioning checks reflector spacing, alignment, carton coverage, load gaps and transit speed against the documented reflector ranges, response time and switching frequency before registering passage events.

Problem Solved

A carton-passage reference gives an external counter a defined optical event across the conveyor, using beam interruption and a reflector arrangement checked for the actual load path.

Carton counting Beam interruption PNP signal

2. Monitoring opaque web continuity at a feed point

A material feed can route an opaque web through the reflected optical path between the sensor and a reflector. External process logic samples the PNP signal to evaluate material presence and recognize a break. Setup checks web movement, optical coverage, alignment and the reflector-specific minimum separation, keeping the beam reliably covered throughout normal feed conditions.

Problem Solved

A beam-interruption reference helps external process logic recognize loss of opaque feed at the checked location, using a material path that blocks the reflected beam during normal operation.

Web continuity Opaque material Reflector setup

3. Checking transfer-path occupancy at a stop

A transfer stop can present an opaque carrier across the sensor-to-reflector path at a defined seated position. External sequencing logic samples the PNP state after the carrier settles and coordinates acceptance or release. Installation checks reflector distance, alignment, carrier coverage and possible openings through the carrier so the occupied condition remains distinguishable from the clear path.

Problem Solved

A carrier-occupancy reference helps external sequencing logic coordinate a transfer step, using a defined optical interruption checked at the actual stopped position before release.

Transfer occupancy Stopped carrier PNP signal
Select your currency