1. Tracking relative angle of a driven machine axis
A machine axis can rotate the encoder and feed the A/B channels to external incremental counting electronics. The controller derives relative angular movement and direction from the pulse sequence after establishing its own position reference. The 1,024 pulses per revolution, six-channel interface and stated angular errors provide the measurement basis for the configured counting method.
Problem Solved
Incremental transitions give external motion electronics a movement reference, helping track relative axis displacement and direction between established reference events during ordinary machine motion.
Relative angle
1,024 pulses/revolution
TTL / RS-422
2. Measuring conveyor travel from a coupled roller
A conveyor measuring roller can turn the encoder as material advances, allowing external counting logic to relate accumulated pulses to travel using the actual roller geometry. The installation establishes contact conditions and mechanical coupling so roller motion represents material movement. The encoder supplies incremental signals through its selected connection while its shaft configuration and speed limit govern mechanical integration.
Problem Solved
A pulse total tied to measuring-roller rotation gives external conveyor logic a travel reference, helping coordinate feed distance with observed mechanical movement along the transport path.
Conveyor travel
External pulse counter
Roller coupling
3. Monitoring rotation rate and a once-per-turn reference
An external monitoring routine can measure the A/B pulse rate over a defined interval and compare the resulting rotation estimate with the intended machine speed. The gated Z pulse provides a separate once-per-revolution reference for ordinary cycle monitoring. Installation accounts for the interface, output-frequency rating, mechanical speed limit and the temperature rise associated with rotation.
Problem Solved
Pulse rate and the separate reference event give external monitoring two rotation observations, helping identify an unusual speed or missing turn event during the machine cycle.
Speed monitoring
Gated reference
External timing