1. Wafer Handling End-of-Arm Tooling (EOAT) Control
Utilized on robotic arms in semiconductor manufacturing to control miniature pneumatic grippers and positioning cylinders. The exceptionally light 55g weight prevents robotic arm strain, while the Class 5 cleanroom certification ensures no particulate contamination occurs during wafer transport.
Problem SolvedEliminates the risk of dropping delicate semiconductor wafers during emergency stops or power failures. The 5/3 closed mid-position traps air in the cylinder to hold the wafer securely in place until normal operation resumes.
Class 5 Cleanroom55 g Weight5/3 Closed Mid-Position10 mm Valve SizeM5 Ports
2. Medical Device Automated Assembly Press
Integrated into multi-station assembly dials for producing medical syringes or inhalers. The 24V DC, 1.0W low-power solenoids allow direct PLC control without intermediate relays, and the compact 10mm width allows high-density manifold mounting.
Problem SolvedPrevents crushing or damaging fragile plastic medical components during the press-fit assembly process. By utilizing the 5/3 closed center function and fast 11ms switching time, the pressing cylinder can be halted instantly mid-stroke if torque/force sensors detect an anomaly.
5/3 Closed Center11 ms Switching Time24V DC1.0 W Power ConsumptionCompact Manifold Assembly
3. Dense Electronics Testing Fixtures (ATE)
Employed within enclosed Automated Test Equipment (ATE) to drive small, pneumatic pogo-pin actuators and board-clamping cylinders. Given the indoor, dry environment, the IP40 rating is perfectly suited while minimizing cost.
Problem SolvedSolves space constraint and thermal management issues in enclosed testing chassis. The 10mm valve size combined with M5 ports allows ultra-dense packaging, and the low 1.0W holding power minimizes heat generation near sensitive electronic test equipment.
IP40 Protection1.0 W Coil10 mm WidthM5 Pneumatic Connections210 l/min Flow Rate
