USD 155.72
Die-cast aluminum ISO 5599-1 compliant unit offering 0.5-10 bar pressure regulation and secondary venting. IP65/NEMA 4 rated for rugged pneumatic control.
Die-cast aluminum ISO 5599-1 compliant unit offering 0.5-10 bar pressure regulation and secondary venting. IP65/NEMA 4 rated for rugged pneumatic control.
| Parameter | Value |
|---|---|
| Construction Width | 54 mm |
| Based on Standard | ISO 5599-1 |
| Vertical Pneumatic Linkage | Pressure regulator for 1 |
| Controller Function | Output pressure constant, with secondary venting |
| Pressure Regulation Range | 0.5 bar to 10 bar (0.05 MPa to 1 MPa / 7.25 psi to 145 psi) |
| Inlet Pressure 1 | 0.5 bar to 10 bar |
| Operating Medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Degree of Protection | IP65, NEMA 4 |
| Ambient Temperature | -5 °C to 50 °C |
| Product Weight | 1190 g |
| Corrosion Resistance Class (CRC) | 0 - No corrosion stress |
| Material (Housing) | Die-cast aluminium |
| Material (Control Panel) | PA |
| Physical Weight (kg) | 1.19 |
| Dimensions L x W x H (cm) | 0 x 5.4 x 0 |
The precise 0.5 to 10 bar regulation capability allows strict pressure maintenance in high-speed packaging equipment. Its secondary venting reliably bleeds off excess pressure to prevent actuator over-travel.
Prevents inconsistent cylinder actuation in rapid packaging lines by compensating for upstream pressure fluctuations.
With an IP65/NEMA 4 rating and die-cast aluminum housing, this plate provides resilient pressure control in dusty or wet manufacturing environments, ensuring consistent valve performance.
Protects sensitive pressure regulation mechanisms from dust and low-pressure water jets common in industrial washdown or milling zones.
Its 54mm construction width and ISO 5599-1 compliance make it ideal for modular pneumatic valve terminals, allowing for space-saving vertical stacking directly on manifold sub-bases.
Reduces footprint and complexity in multi-valve pneumatic control panels by enabling vertical integration without additional piping.
