USD 8.96
Straight pneumatic connector adapting 4mm OD tubing to a 6mm push-in sleeve. Features a reliable push-pull mechanism, rated for -0.95 to 8 bar.
Straight pneumatic connector adapting 4mm OD tubing to a 6mm push-in sleeve. Features a reliable push-pull mechanism, rated for -0.95 to 8 bar.
| Parameter | Value |
|---|---|
| Nominal size | 3.5 mm |
| Pneumatic connection 1 | For tubing outside diameter 4 mm |
| Pneumatic connection 2 | Push-in sleeve diameter 6 mm |
| Operating pressure | -0.95 bar to 8 bar |
| Operating temperature | -5 °C to +60 °C |
| Cleanroom class | Class 4 to ISO 14644-1 |
| Housing material | PBT |
| Release ring material | POM |
| Tubing seal material | NBR |
| Design principle | Push-pull |
| Physical Weight (kg) | 0 |
| Dimensions L x W x H (cm) | 3.95 x 1.05 x 1.05 |
Utilizing the ISO 14644-1 Class 4 suitability to safely channel low-pressure air within high-purity microchip fabrication cells.
Prevents particulate contamination during pneumatic actuation while easily fitting into tight machine spaces.
Acting as an inline 4mm to 6mm step-up reducer in the pneumatic supply line for lightweight robot gripper arms.
Minimizes payload drag on robotic joints by weighing only 2.5g while securely adapting differing tubing sizes.
Connecting sequential pneumatic logic blocks where multiple size variances exist across compressed air lines.
Enables rapid, tool-free push-pull reconfigurations of complex pneumatic networks during machinery changeovers under pressures up to 8 bar.
