USD 9.70
L-shaped pneumatic fitting (R3/8 to 12mm OD tubing) featuring push-pull connection. Rated for -0.95 to 8 bar pressure. Cleanroom Class 4 and RoHS compliant.
L-shaped pneumatic fitting (R3/8 to 12mm OD tubing) featuring push-pull connection. Rated for -0.95 to 8 bar pressure. Cleanroom Class 4 and RoHS compliant.
| Parameter | Value |
|---|---|
| Nominal Size | 9.5 mm |
| Operating Pressure Range | -0.95 to 8 bar (-0.095 to 0.8 MPa) |
| Ambient Temperature Range | -5 °C to 60 °C |
| Pneumatic Connection 1 | Male thread R3/8 |
| Pneumatic Connection 2 | For tubing O.D. 12 mm |
| Cleanroom Class | Class 4 (ISO 14644-1) |
| Corrosion Resistance Class | CRC 1 (Low corrosion stress) |
| Housing Material | Brass, nickel-plated, PBT |
| Release Ring Material | POM |
| Tubing Seal Material | NBR |
| Thread Seal Material | PTFE |
| Physical Weight (kg) | 0.03 |
| Dimensions L x W x H (cm) | 0 x 0 x 0 |
Due to its ISO Class 4 cleanroom suitability and low particulate emissions, this fitting is ideal for routing compressed air in semiconductor manufacturing and pharmaceutical packaging where strict contamination control is required.
Prevents contamination in highly sensitive environments while maintaining robust pneumatic connections up to 8 bar.
The L-shaped design and push-pull principle enable tight-radius pneumatic routing on articulating robot arms. The 12mm tubing compatibility provides sufficient airflow for medium-to-large end effectors.
Solves clearance issues in dynamic robotic setups by offering a reliable right-angle connection that prevents tubing kinking under motion.
With an operating pressure rating dropping down to -0.95 bar, this fitting can be used securely on the vacuum side of material handling systems, connecting suction cups to vacuum generators.
Provides a reliable, leak-free connection under negative pressure conditions, eliminating the risk of load-dropping in vacuum lifters.
