USD 9.20
Right-angle pneumatic connector for R3/8 to 10mm O.D. tubing. Supports -0.95 to 8 bar pressure and -5°C to 60°C. Features robust nickel-plated brass housing.
Right-angle pneumatic connector for R3/8 to 10mm O.D. tubing. Supports -0.95 to 8 bar pressure and -5°C to 60°C. Features robust nickel-plated brass housing.
| Parameter | Value |
|---|---|
| Nominal Size | 9.3 mm |
| Pneumatic Connection, Port 1 | Male thread R3/8 |
| Pneumatic Connection, Port 2 | For tubing outside diameter of 10 mm |
| Operating Pressure Range | -0.95 bar to 8 bar (-0.095 MPa to 0.8 MPa) |
| Ambient Temperature | -5 °C to 60 °C |
| Material (Housing) | Brass, nickel-plated; PBT |
| Material (Tubing Clamp Component) | Stainless steel |
| Material (Tubing Seal) | NBR |
| Material (Thread Seal) | PTFE |
| Mounting Type | External hexagon, size 17 mm |
| Corrosion Resistance Class (CRC) | 1 - Low corrosion stress |
| Physical Weight (kg) | 0.03 |
| Dimensions L x W x H (cm) | 0 x 0 x 0 |
Used to connect 10mm pneumatic tubing at a right angle to an R3/8 manifold on robotic arms, saving space in tight kinematic envelopes.
Eliminates tubing kinks and minimizes installation space by routing the airline 90 degrees immediately at the manifold.
Integrated into end-of-arm vacuum grippers, this fitting safely withstands negative pressures down to -0.95 bar, securely holding 10mm suction lines.
Prevents vacuum leaks during dynamic robotic movements, ensuring secure gripping through reliable stainless steel tube clamping.
Deploys standard compressed air to CNC fixtures up to 8 bar. The low-corrosion brass and PBT construction withstands typical shop floor environments.
Reduces installation time with a simple push-pull mechanism while resisting mild corrosion from lubricated air and coolants.
