| Product Type | Distributor terminal block |
| Number of Connections | 7 |
| Number of Rows | 1 |
| Potentials | 1 |
| Overvoltage Category | III |
| Degree of Pollution | 3 |
| Rated Surge Voltage | 8 kV |
| Max Power Dissipation (Nominal Condition) | 0.77 W |
| Service Entrance | Yes |
| Connections per Level | 7 |
| Nominal Cross Section (Load Contact) | 2.5 mm² |
| Rated Cross Section AWG (Load Contact) | 14 |
| Connection Method | Push-in connection |
| Stripping Length (Load Contact) | 8 mm - 10 mm |
| Internal Cylindrical Gage (Load Contact) | A3 |
| Connection Standard | IEC 60947-7-1 |
| Conductor Cross-section Rigid (Load Contact) | 0.14 mm² - 4 mm² |
| Conductor Cross-section AWG (Load Contact) | 26 - 12 (converted acc. to IEC) |
| Conductor Cross-section Flexible (Load Contact) | 0.14 mm² - 4 mm² |
| Conductor Cross-section Flexible AWG (Load Contact) | 26 - 12 (converted acc. to IEC) |
| Conductor Cross-section Flexible (Ferrule without Plastic Sleeve) (Load Contact) | 0.14 mm² - 2.5 mm² |
| Conductor Cross-section Flexible (Ferrule with Plastic Sleeve) (Load Contact) | 0.14 mm² - 2.5 mm² |
| Conductor Cross-section 2 Wires Flexible (TWIN Ferrule with Plastic Sleeve) (Load Contact) | 0.5 mm² |
| Nominal Current (Load Contact) | 24 A |
| Nominal Cross Section (Line Contact) | 6 mm² |
| Stripping Length (Line Contact) | 10 mm - 12 mm |
| Internal Cylindrical Gage (Line Contact) | A5 |
| Conductor Cross-section Rigid (Line Contact) | 0.5 mm² - 10 mm² |
| Conductor Cross-section AWG (Line Contact) | 20 - 8 (converted acc. to IEC) |
| Conductor Cross-section Flexible (Line Contact) | 0.5 mm² - 10 mm² |
| Conductor Cross-section Flexible AWG (Line Contact) | 20 - 8 (converted acc. to IEC) |
| Conductor Cross-section Flexible (Ferrule without Plastic Sleeve) (Line Contact) | 0.5 mm² - 6 mm² |
| Conductor Cross-section Flexible (Ferrule with Plastic Sleeve) (Line Contact) | 0.5 mm² - 6 mm² |
| Conductor Cross-section 2 Wires Flexible (TWIN Ferrule with Plastic Sleeve) (Line Contact) | 0.5 mm² - 1.5 mm² |
| Nominal Current (Line Contact) | 41 A |
| Max Load Current (Line Contact) | 57 A (with 10 mm² conductor cross-section) |
| Max Total Current (Line Contact) | 57 A (The maximum load current of the individual terminal point must not be exceeded.) |
| Nominal Voltage | 690 V |
| Conductor Cross-section Rigid (Load Contact Direct Pluggable) | 0.34 mm² - 4 mm² |
| Conductor Cross-section Rigid AWG (Load Contact Direct Pluggable) | 24 - 12 (converted acc. to IEC) |
| Conductor Cross-section Flexible (Ferrule without Plastic Sleeve) (Load Contact Direct Pluggable) | 0.5 mm² - 2.5 mm² |
| Conductor Cross-section Flexible (Ferrule with Plastic Sleeve) (Load Contact Direct Pluggable) | 0.34 mm² - 2.5 mm² |
| Conductor Cross-section Rigid (Line Contact Direct Pluggable) | 1 mm² - 10 mm² |
| Conductor Cross-section Flexible (Ferrule without Plastic Sleeve) (Line Contact Direct Pluggable) | 1 mm² - 6 mm² |
| Conductor Cross-section Flexible (Ferrule with Plastic Sleeve) (Line Contact Direct Pluggable) | 1 mm² - 6 mm² |
| Color | gray (RAL 7042) |
| Flammability Rating UL 94 | V0 |
| Insulating Material Group | I |
| Insulating Material | PA |
| Operating Temperature | -60 °C ... 110 °C |
| Storage/Transport Temperature | -25 °C ... 60 °C (for short time, not exceeding 24 h, -60 °C to +70 °C) |
| Assembly Temperature | -5 °C ... 70 °C |
| Actuation Temperature | -5 °C ... 70 °C |
| Permissible Humidity (Operation) | 20% ... 90% |
| Permissible Humidity (Storage/Transport) | 30% ... 70% |
| Mounting Type | DIN rail (NS 35/7,5, NS 35/15) |
| Short-time Withstand Current (6 mm²) | 0.72 kA |
| Short-time Withstand Current (10 mm²) | 1.2 kA |
| Rotation Speed (Conductor Damage Test) | 10 rpm |
| Revolutions (Conductor Damage Test) | 135 |
| Oscillation/Broadband Noise Specification | DIN EN 50155 (VDE 0115-200):2008-03 |
| Oscillation Spectrum | Long life test category 2, bogie-mounted |
| Oscillation Frequency | f₁ = 5 Hz to f₂ = 250 Hz |
| Oscillation ASD Level | 6.12 (m/s²)²/Hz |
| Oscillation Acceleration | 3.12g |
| Oscillation Test Duration per Axis | 5 h |
| Oscillation Test Directions | X-, Y- and Z-axis |
| Shocks Specification | DIN EN 50155 (VDE 0115-200):2008-03 |
| Shock Pulse Shape | Half-sine |
| Shock Acceleration | 30g |
| Shock Duration | 18 ms |
| Shock Number of Shocks per Direction | 3 |
| Shock Test Directions | X-, Y- and Z-axis (pos. and neg.) |
| Physical Weight (kg) | 0.02 |
| Dimensions L x W x H (cm) | 3.09 x 2.56 x 4.57 |
