Pepperl+Fuchs OBT300-R100-2EP-IO-V31-L Triangulation Sensor

Technical Overview

Compact triangulation sensor, DuraBeam laser, 7-300mm BGS detection. IP69K, IO-Link enabled, -40 to 60°C operation. Ideal for precise industrial object sensing.

Key Features

Miniature design with versatile mounting options
DuraBeam Laser Sensors for durability and reliability
Extended operating temperature range of -40 °C to 60 °C
High degree of protection IP67 / IP69 / IP69K
IO-Link interface for service and process data
Laser diffuse mode with adjustable background suppression
Multi Pixel Technology for high flexibility and adaptability
2 push-pull (4 in 1) outputs, short-circuit and reverse polarity protected
Adjustable sensing range and sensitivity
Configurable light-on / dark-on switching
M8 x 1, 4-pin connector

Technical Specification Matrix

Parameter	Value
Detection Range	7 ... 300 mm
Detection Range Min.	7 ... 25 mm
Detection Range Max.	7 ... 300 mm
Adjustment Range	25 ... 300 mm
Reference Target	Standard white, 100 mm x 100 mm
Light Source	Laser diode
Light Type	Modulated visible red light
Laser Class	1
Wave Length	680 nm
Beam Divergence	> 5 mrad d63 < 1 mm (150 mm ... 250 mm)
Pulse Length	3 µs
Repetition Rate	Approx. 13 kHz
Max. Pulse Energy	10.4 nJ
Black-White Difference (6%/90%)	< 5% at 150 mm
Diameter of Light Spot	Approx. 1 mm at 200 mm
Opening Angle	Approx. 0.3°
Ambient Light Limit	EN 60947-5-2: 40000 Lux
MTTFd	560 a
Mission Time (Tm)	20 a
Diagnostic Coverage (DC)	0%
Operating Voltage (UB)	10 ... 30 V DC
Ripple	Max. 10 %
No-Load Supply Current (Io)	< 20 mA at 24 V supply voltage
Protection Class	III
Switching Voltage	Max. 30 V DC
Switching Current	Max. 100 mA, resistive load
Usage Category	DC-12 and DC-13
Voltage Drop (Ud)	≤ 1.5 V DC
Switching Frequency (f)	1650 Hz
Response Time	300 µs
Communication Interface	IEC 61131-9
Product Standard	EN 60947-5-2
Laser Safety Standard	EN 60825-1:2014
UL Approval	E87056, cULus Listed, class 2 power supply, type rating 1
FDA Approval	IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.
Ambient Temperature	-40 ... 60 °C (-40 ... 140 °F)
Storage Temperature	-40 ... 70 °C (-40 ... 158 °F)
Degree of Protection	IP67 / IP69 / IP69K
Connection	M8 x 1 connector, 4-pin
Housing Material	PC (Polycarbonate)
Optical Face Material	PMMA
IO-Link Revision	1.1
Device Profile	Smart Sensor
Device ID	0x110602 (1115650)
Transfer Rate	COM2 (38.4 kBit/s)
Min. Cycle Time	2.3 ms
Process Data Width	Process data input 1 Bit, Process data output 2 Bit
SIO Mode Support	Yes
Compatible Master Port Type	A
Signal Output	2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Physical Weight (kg)	0.01
Dimensions L x W x H (cm)	4.45 x 1.1 x 2.15

Industrial Applications

1. Small Part Detection in Electronics Assembly

This sensor is ideal for detecting tiny, varied-color components on a conveyor belt within highly confined electronic assembly lines. Its miniature dimensions enable integration into compact machinery where space is limited.

Problem Solved

Precisely detects small components despite color variations and tight spatial constraints, preventing assembly errors and improving quality control.

miniature sensorprecision detectionsmall componentselectronics manufacturingbackground suppression

2. Object Position Verification in Harsh Food Processing

The sensor reliably verifies correct product placement on conveyors in food processing areas, which frequently experience high-pressure, high-temperature washdowns and wide temperature fluctuations.

Problem Solved

Ensures accurate product positioning in demanding washdown environments, resisting steam and chemicals while operating across extreme temperatures from -40°C to 60°C.

food processingwashdownIP69Ktemperature extremeobject positioningquality control

3. Fill Level Monitoring for Opaque Containers in Packaging

The OBT300-R100-2EP-IO-V31-L accurately monitors the fill levels of opaque liquids or powders in containers on packaging lines, providing non-contact measurement without contamination.

Problem Solved

Offers precise, non-contact fill level detection for various opaque materials, utilizing IO-Link for real-time data to maintain consistent product volume and prevent overfilling or underfilling.

fill level monitoringpackaging automationnon-contact sensingopaque materialsprocess dataIO-Link