Panasonic FX-101P-CC2 Digital Fiber Sensor

Technical Overview

Slim 9mm digital fiber sensor with dual display for simultaneous threshold/incident light intensity. Stable four-chemical element ensures long-term reliability.

Key Features

Ultra-slim 9 mm (0.354 in) body for high-density mounting
Dual digital display confirms threshold and incident light intensity simultaneously
Four-chemical emitting element ensures long-term stable light emission
Simplified 3-level configuration system (RUN, SET, PRO modes) for intuitive operation
Quick code input function for easy restoration of default settings
Interference prevention function allows parallel installation of multiple units (up to 3 units for FX-101 types)
Setting copy function reduces man-hours and human error for multi-sensor installations
External input setting for emission halt, various teaching modes (limit, full-auto, 2-level), and ECO
Flexible mounting options: DIN rail or direct mounting with through holes
Digital display inversion setting for optimal viewing orientation
Alert function provides visual notification when incident light approaches threshold
ECO mode reduces power consumption to 600 mW or less during idle periods
PNP open-collector transistor output type with 100 mA maximum source current
Configurable ON-delay/OFF-delay timer with periods from 1 ms to 1,000 ms

Technical Specification Matrix

Parameter	Value
Supply Voltage	12 to 24 V DC ±10% Ripple P-P 10% or less
Power Consumption (Normal Operation)	720 mW or less (Current consumption 30 mA or less at 24 V)
Power Consumption (ECO Mode)	600 mW or less (Current consumption 25 mA or less at 24 V)
Output Type	PNP open-collector transistor
Maximum Source Current	100 mA
Applied Output Voltage	30 V DC or less (between output and +V)
Residual Output Voltage	1.5 V or less (at 100 mA source current)
Output Operation	Selectable Light-ON or Dark-ON, at SET mode
Short-circuit Protection	Incorporated
External Input (PNP Type) Signal Condition High	+4 V to +V DC (Sink current 0.5 to 3 mA)
External Input (PNP Type) Signal Condition Low	0 to +0.6 V DC or Open
External Input Impedance	10 kΩ approx.
Response Time (Emission Freq. 1, factory default)	2.5 ms or less
Sensitivity Setting	2-point teaching / Limit teaching / Full-auto teaching
Operation Indicator	Orange LED (lights up when the output is ON)
Digital Display	4 digits (green) + 4 digits (red) LCD display
Timer Function	ON-delay/OFF-delay timer, 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms
Ambient Temperature Range (Operation)	-10 to +55 °C
Ambient Temperature Range (Storage)	-20 to +70 °C
Ambient Humidity Range (Operation & Storage)	35 to 85% RH (No dew condensation or icing allowed)
Ambient Illuminance	Incandescent light: 3,000 lx or less at the light-receiving face
Voltage Withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance	20 MΩ or more, with 250 V DC megger
Vibration Resistance	10 to 150 Hz frequency, 0.75 mm double amplitude in X, Y and Z directions for two hours each
Shock Resistance	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
Emitting Element	Red LED (Peak emission wavelength: 643 nm)
Enclosure Material	Polycarbonate
Key Switch Material	Polycarbonate
Fiber Lock Lever Material	PBT
Connecting Method	Connector
Max. Cable Length (Recommended)	Up to 100 m with 0.3 mm² or more cable
Physical Weight (kg)	0.02
Dimensions L x W x H (cm)	6.62 x 0.9 x 4.8

Industrial Applications

1. High-Density Part Detection in Electronics Assembly

The ultra-slim 9mm body of the FX-101P-CC2 allows for closely packed sensor installations, essential for detecting small, precise components on crowded printed circuit boards or within compact micro-assembly lines in electronics manufacturing.

Problem Solved

In confined spaces, traditional sensors often limit the number of detection points. This sensor's compact footprint enables a higher density of sensing, providing finer control and error detection without increasing machine size.

High-density mountingMiniature component detectionPCB assemblyMicro-assemblySpace-constrained automation

2. Long-Term Stable Object Position Monitoring in Packaging Lines

Utilizing its 'Four-chemical emitting element,' the FX-101P-CC2 provides highly stable light emission over extended periods. This makes it ideal for consistent and reliable object presence or position monitoring in high-volume packaging and material handling machinery, minimizing drift and ensuring continuous operation.

Problem Solved

Conventional sensors can suffer from light emission degradation, leading to unreliable detection and frequent maintenance. The FX-101P-CC2's enhanced stability ensures consistent performance, reducing downtime and improving overall line efficiency.

Long-term stabilityPackaging automationObject presence detectionConsistent sensingReduced maintenance

3. Transparent Film or Web Guiding with Fine Sensitivity

The FX-101P-CC2's 2-point teaching and fine sensitivity adjustment features, combined with its dual digital display, allow for precise and reliable detection of challenging transparent materials like films or webs. Real-time incident light intensity monitoring assists in optimizing settings to prevent false triggers.

Problem Solved

Accurate detection of transparent materials is difficult due to their varying light transmission. This sensor's precise teaching modes and immediate feedback on light intensity enable engineers to finely tune the sensor for reliable differentiation between material presence and absence.

Transparent object detectionFilm guidingWeb tension controlFine sensitivity adjustmentMaterial handling