USD 83.52
Removable lens attachment for Panasonic LS-400 series. Converts LS-H21 spot reflective sensor to LS-H22 line reflective type for wide-area detection.
Removable lens attachment for Panasonic LS-400 series. Converts LS-H21 spot reflective sensor to LS-H22 line reflective type for wide-area detection.
| Parameter | Value |
|---|---|
| Product Type | Lens Attachment |
| Compatible Series | Panasonic LS-400 Series (LS-H21, LS-H21F, LS-H21-A, LS-H21F-A) |
| Converted Function | Converts spot reflective type to line reflective type (equivalent to LS-H22) |
| Sensing Range (with LS-H21/LS-H22) | 30 to 1,000 mm (U-LG mode), 30 to 500 mm (STD mode), 30 to 300 mm (FAST/H-SP mode) |
| Line Width (at 500 mm) | Approx. 115 mm (typical) |
| Line Width (at 1,000 mm) | Approx. 240 mm (typical) |
| Mounting Type | Snap-on with upper and lower fixing hooks |
| Physical Weight (kg) | 0 |
| Dimensions L x W x H (cm) | 0 x 0 x 0 |
Utilizes the converted line laser beam to detect PCB edges or electronic component pins. Since the beam is line-shaped rather than a single spot, minor misalignments or complex physical contours on the PCB do not cause false triggers.
Slight position shifts or uneven surfaces on circuit boards often cause spot lasers to miss the target or trigger incorrectly.
Attaches to LS-H21 sensor heads in printing or packaging lines to project a wide line beam across the edge of moving sheets or rolls. This ensures continuous detection of web presence or breakage regardless of slight lateral drift.
Narrow spot sensors can fail to detect moving sheets if the material wanders slightly off-center.
Implements the LS-MR1 lens on an existing LS-H21 sensor head to create a wide line profile. This is ideal for automotive assembly or conveyor systems where parts of varying heights and highly textured surfaces need reliable presence sensing.
Convexo-concave parts or varied-profile components cause unstable detection with single-point spot sensors.
