| Supply Voltage | 12 to 24 V DC ±10% Ripple P-P 10% or less |
| Power Consumption (Normal Operation) | 1,200 mW or less (Current consumption 50 mA or less at 24 V supply voltage) |
| Power Consumption (ECO Mode) | 980 mW or less (Current consumption 40 mA or less at 24 V supply voltage) |
| Output Type | NPN open-collector transistor two outputs |
| Maximum Sink Current | 50 mA |
| Applied Voltage (Output) | 30 V DC or less (between output and 0 V) |
| Residual Voltage (Output) | 2 V or less (at max. sink current) |
| Output Operation | Selectable Light-ON or Dark-ON |
| Short-Circuit Protection | Incorporated |
| Sensing Output Settings | Normal mode, differential mode, hysteresis mode, window comparator mode, self-diagnostic output mode, answer-back output mode, selectable |
| Response Time (H-SP) | 60 µs or less |
| Response Time (FAST) | 150 µs or less |
| Response Time (STD) | 250 µs or less |
| Response Time (LONG) | 500 µs or less |
| Response Time (U-LG) | 5 ms or less |
| Response Time (HYPR) | 24 ms or less |
| Monitor Current Output | Approx. 4 to 20 mA (H-SP, FAST, STD: at 0 to 4,000 indication) |
| Monitor Current Output Response Time | 2 ms or less |
| Monitor Current Output Zero Point | 4 mA ± 1% F.S. |
| Monitor Current Output Span | 16 mA ± 5% F.S. |
| Monitor Current Output Linearity | ± 3% F.S. |
| Monitor Current Output Load Resistance | 0 to 250 Ω |
| External Input (NPN) Signal Condition High | +8 V to +V DC or open |
| External Input (NPN) Signal Condition Low | 0 to +2 V DC (source current 0.5 mA or less) |
| External Input Impedance | 10 kΩ approx. |
| External Input Functions | Laser emission halt / teaching (full-auto teaching, limit teaching, 2 point teaching) / logic operation setting / copy lock / display adjustment / data bank load / data bank save |
| Sensing Output Operation Indicator | Orange LED (lights up when sensing output 1 or sensing output 2 is ON) |
| Laser Emission Indicator | Green LED (lights up during laser emission) |
| Output Select Indicator | Yellow LED (lights up when output is selected) |
| Digital Display | 8-digit 7-segment digital display (4-digit green LED + 4-digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO |
| Incident Light Indication Range (H-SP/FAST/STD) | 0 to 4,000 |
| Incident Light Indication Range (LONG/U-LG/HYPR) | 0 to 9,999 |
| Sensitivity Setting | 2-point teaching / limit teaching / full auto teaching / manual adjustment |
| Logical Operation | Disabled / AND / OR / XOR, selectable |
| Timer Functions | OFF-delay timer, ON-delay timer, One-shot timer, ON/OFF-delay timer, ON-delay / One-shot timer, switchable either effective/ineffective, with variable timer period |
| Timer Period (ms range) | 0.5 ms approx. to 9,999 ms approx. (in approx. 1 ms intervals) |
| Timer Period (sec range) | 0.5 sec. approx. to 32 sec. approx. (in approx. 1 sec. intervals) |
| Timer Period (1/10 ms range) | 0.05 ms approx. to 999.9 ms approx. (in approx. 0.1 ms intervals) |
| Interference Prevention Function | Incorporated |
| Protection | IP40 (IEC) |
| Ambient Temperature | -10 to +55°C (no dew condensation or icing allowed) |
| Storage Temperature | -20 to +70°C |
| Ambient Humidity | 35 to 85% RH |
| Storage Humidity | 35 to 85% RH |
| Voltage Withstandability | 1,000 V AC for one min. |
| Insulation Resistance | 20 MΩ or more, with 250 V DC megger |
| Vibration Resistance | 10 to 150 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s² in X, Y and Z directions for two hours each |
| Shock Resistance | 98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each |
| Material (Enclosure) | Polycarbonate |
| Material (Cover) | Polycarbonate |
| Material (Switch) | Polyacetal |
| Cable Type | 0.2 mm² 6-core cabtyre cable |
| Cable Length | 2 m |
| Cable Extension | Up to total 100 m possible with 0.3 mm² or more, cable |
| Dimensions (W) | 10 mm |
| Dimensions (H) | 32 mm |
| Dimensions (D) | 47.2 mm |
| Physical Weight (kg) | 0.08 |
| Dimensions L x W x H (cm) | 4.72 x 1 x 3.2 |
