WAGO 750-530 8-Channel Digital Output Module

Technical Overview

Provides eight 24VDC, 0.5A, short-circuit protected, high-side switching digital outputs with 500V isolation.

Key Features

8-channel digital output module.
24 VDC output voltage.
0.5 A output current per channel.
Short-circuit protected outputs.
High-side switching characteristic.
Electrical isolation of 500 V between field and system levels.
Maximum switching frequency of 2 kHz.
CAGE CLAMP® connection technology.
DIN-rail mounting.
LED status indicators for each channel.

Technical Specification Matrix

Parameter	Value
Number of Digital Outputs	8
Signal Type	Voltage
Voltage Signal Type	DC 24 V
Output Current per Channel	0.5 A
Max. Switching Frequency	2 kHz
Isolation (System/Field)	500 V
Enclosure Rating	IP20
System Supply Voltage	DC 5 V
Power Consumption (5 V System Supply)	25 mA
Field Supply Voltage	DC 24 V (-25 … +30 %)
Power Consumption (Field Supply, no external load)	15 mA
Current Carrying Capacity (Power Jumper Contacts)	10 A
Connection Technology	CAGE CLAMP®
Solid Conductor Range	0.08 … 2.5 mm² / 28 … 14 AWG
Fine-Stranded Conductor Range	0.08 … 2.5 mm² / 28 … 14 AWG
Strip Length	8 … 9 mm / 0.31 … 0.35 inch
Physical Weight (kg)	0.05
Dimensions L x W x H (cm)	6.78 x 1.2 x 10

Industrial Applications

1. Industrial Lighting Control in Factories

This module can precisely control up to eight individual 24VDC industrial light fixtures or light groups within a factory automation system. Its compact 12mm width allows for high-density control panel installations.

Problem Solved

Enables centralized, automated control of factory lighting zones, improving energy efficiency and operational safety. The 0.5A per channel output is sufficient for many LED industrial lights, and short-circuit protection safeguards the system from faults.

24 VDC0.5A output8-channelshort-circuit protected12mm widthindustrial lighting

2. Solenoid Valve Actuation in Pneumatic/Hydraulic Systems

The 750-530 module is ideal for actuating up to eight 24VDC solenoid valves in pneumatic or low-power hydraulic control systems. The 0.5A current per channel is suitable for typical industrial solenoid valves.

Problem Solved

Provides reliable, isolated control for multiple valves, crucial for automated processes like material handling, clamping, or fluid dispensing. The 500V system/field isolation prevents electrical noise from actuators affecting the control logic.

24 VDC0.5A output8-channelhigh-side switching500V isolationsolenoid valvespneumatic control

3. Motor Starter / Contactor Coil Control

This module can activate the coils of up to eight 24VDC industrial contactors or small motor starters, enabling remote and automated control of motors and higher-power loads.

Problem Solved

Allows for safe and efficient control of motors and other high-current devices by using the module to switch the low-power control circuit of a contactor, protecting the PLC from high-power loads. Short-circuit protection adds an extra layer of safety.

24 VDC0.5A output8-channelhigh-side switchingresistive/inductive loadcontactor controlmotor starters