USD 242.60
8-port 10/100Base-TX unmanaged switch, 18–30 VDC input, DIN-rail mount, IP30, -40 to 70 °C operation.
8-port unmanaged industrial Ethernet switch with 10/100Base-TX copper ports, Auto-Negotiation and Auto-MDI/MDI-X, store-and-forward switching, DIN-35 rail mounting, and IP30 enclosure. The device supports 18–30 VDC input, 3 W max power consumption, 2000 MAC address table, and operates from -40 to 70 °C. Suitable for compact industrial network distribution in control panels and machine systems.
| Parameter | Value |
|---|---|
| Switching mode | Store-and-forward, non-blocking |
| Number of 100Base-TX ports | 8 |
| Communication standards | IEEE 802.3 10BASE-T; IEEE 802.3u 100BASE-TX; IEEE 802.3x Flow Control |
| MAC table size | 2000 addresses |
| Jumbo frame size | 1536 Byte |
| Supply voltage | DC 18 … 30 V |
| Power consumption max. | 3 W |
| Baud rate | 10/100 Mbit/s |
| Transmission medium | Copper cable: Cat. 5 or higher, 100 m maximum cable length |
| Topology | Star |
| Indicators | PWR and per-port 100 / LNK/ACT LEDs |
| Connection technology | 8 x RJ-45 |
| Supply connection | 1 x built-in PCB terminal block: 739-103 |
| Width | 109.2 mm |
| Height from upper edge of DIN-35 rail | 32 mm |
| Depth | 73.8 mm |
| Weight | 415 g |
| Housing material | Sheet steel |
| Operating temperature | -40 … 70 °C |
| Storage temperature | -40 … 80 °C |
| Protection type | IP30 |
| Relative humidity | 95 % (no condensation) |
| Mounting type | DIN-35 rail |
| Vibration resistance | IEC 60068-2-6 |
| Shock resistance | IEC 60068-2-27 |
| GTIN | 4045454847586 |
Use as a compact 8-port distribution switch inside a control cabinet to connect PLCs, HMIs, drives, and remote I/O over 10/100Base-TX.
Eliminates point-to-point cable sprawl and simplifies industrial network expansion in space-constrained enclosures.
Provides a star-topology copper network for small production cells where multiple Ethernet endpoints must share a single uplink without managed-switch complexity.
Enables reliable low-complexity Ethernet distribution for small-to-medium networks with limited panel space and modest power budgets.
Supports retrofit projects where older 10/100 devices need a modern industrial switch with wide-temperature operation and full/half-duplex support.
Bridges legacy Ethernet devices into an industrial cabinet environment while tolerating harsh temperature ranges and vibration.
