USD 242.60
DIN-rail signal splitter with isolated analog conversion, dual configurable current outputs, 24 VDC supply, IP20, 2.5 kV isolation.
JUMPFLEX signal conditioner / isolation amplifier / signal splitter for analog current and voltage signals with two configurable current outputs. The device accepts selectable voltage or current inputs, provides dual current outputs, and includes electrical isolation, configurable limit frequency, and DIN-rail mounting. It is designed for industrial signal conversion and distribution in control and instrumentation systems.
| Parameter | Value |
|---|---|
| Input signal (voltage) | 0 … 5 V; 1 … 5 V; 0 … 10 V; 2 … 10 V |
| Input signal (current) | 0 … 20 mA; 4 … 20 mA |
| Input resistance (current input) | ≤ 50 Ω |
| Input resistance (voltage input) | ≥ 100 kΩ |
| Output signal (current) | 0 … 20 mA; 4 … 20 mA |
| Load impedance (current output) | ≤ 300 Ω per channel |
| Limit frequency | 100 Hz / 1 kHz |
| Step response (typ.) | 3.5 ms (100 Hz); 300 µs (1 kHz) |
| Transmission error (typ.) | ≤ 0.1 % of upper-range value |
| Transmission error (max.) | ≤ 0.2 % of upper-range value |
| Transmission error (under interference) | ≤ 10 % |
| Temperature coefficient | ≤ 0.01 %/K |
| Power supply | 24 VDC |
| Nominal supply voltage US DC | 24 V |
| Supply voltage range | ±30 % |
| Current consumption at nominal supply voltage | ≤ 35 mA |
| Rated voltage | 300 V |
| Protection type | IP20 |
| Test voltage (input/output/supply) | AC 2.5 kV; 50 Hz; 1 min |
| Overvoltage category | II |
| Pollution degree | 2 |
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Strip length | 9 … 10 mm |
| Mounting type | DIN-35 rail |
| Width | 6 mm |
| Height | 94 mm |
| Depth from upper-edge of DIN-rail | 97.8 mm |
| Weight | 40.6 g |
| Ambient temperature (operation) | -25 … +70 °C |
| Ambient temperature (storage) | -40 … +85 °C |
| Relative humidity | 5 … 95 % non-condensing |
| Operating altitude (max.) | 2000 m |
| Product group | 6 (INTERFACE ELECTRONIC) |
| Country of origin | DE |
Use the dual current outputs to distribute one conditioned analog signal to two downstream devices while preserving galvanic isolation and maintaining a standardized current loop interface.
Prevents loading conflicts and ground-loop issues when one process signal must feed multiple controllers or indicators.
Convert a 0–10 V or 2–10 V field signal into a current output to improve noise immunity over industrial wiring runs, especially in electrically noisy panels.
Reduces susceptibility to interference and voltage drop across long interconnects.
Insert the module between field transmitters and control equipment when input, output, and supply domains must be separated and protected with 2.5 kV test isolation.
Limits propagation of ground potential differences and protects analog I/O in multi-device cabinets.
