1. Monitoring a small opening at a hand-fed station
A hand-fed station can position the 120 mm protective field across a defined small access opening, using the 14 mm resolution to monitor interruptions. Compatible safety-related control evaluates the OSSDs and brings the hazardous motion to the required state. Machine design checks access around the field, stopping time and protective distance, then validates the complete safeguard for the actual feeding task.
Problem Solved
An optical protective-field input supports safety-related control at a compact access point, while the machine’s validated geometry and stopping behavior determine the safeguarding arrangement.
Compact access
14 mm resolution
OSSD evaluation
2. Monitoring the final opening of a cascade arrangement
A machine with several access points can use this configuration as the last guest in a compatible two- or three-device miniTwin4 cascade. Its 120 mm field monitors the selected final opening and optical synchronization supports the sensing arrangement. Design uses the cascade response time from the operating instructions, rather than the standalone ≤14 ms value, before calculating and validating the required protective distances.
Problem Solved
A documented final-guest configuration helps integrate a compact protective field into a multi-device arrangement, with cascade-specific timing used to validate the complete machine safeguard.
Final guest
Cascade timing
Multiple access points
3. Configuring restart and contactor monitoring for a station
A compact machine station can integrate the curtain with compatible safety-related logic and controlled output devices. Restart interlock and external device monitoring are supported, but both are deactivated on delivery, so commissioning establishes the intended configuration. Functional checks verify the protective-field interruption, required reset behavior and monitored output-device response before the machine’s safeguarding function is released for use.
Problem Solved
Available restart and EDM functions support the selected control arrangement when configured and validated, helping align reset behavior and output-device feedback with the station’s safeguarding requirements.
Restart configuration
EDM
Commissioning checks