1. Monitoring access through a machine opening
A machine opening can use matched miniTwin4 Twin-Sticks to establish a 1,200 mm protective field with 24 mm resolution. The installed system’s OSSD signals feed external safety evaluation to stop the hazardous function when the field is interrupted. The protective design establishes the mounting geometry and safety distance using actual stopping performance and the standalone response limit, with restart interlock and EDM configured for the application.
Problem Solved
A contactless protective field gives the machine safety system an access-interruption condition, supporting a stopping function while preserving an open passage without a physical sensing contact.
Protective field
24 mm resolution
OSSD evaluation
2. Completing a cascade around connected access planes
A machine with connected access planes can use this variant as the last guest of a compatible two- or three-device miniTwin4 cascade. Each matched segment contributes its protective field to the installed system. The design verifies the actual cascade response from the operating instructions, aligns the optical paths and connects the complete arrangement to external safety evaluation.
Problem Solved
A supported last-guest segment helps the safety design extend protective-field coverage around connected access planes, using a compatible cascade and its documented total response behavior.
Last guest
Two/three-device cascade
Connected planes
3. Checking protective-field interruption during commissioning
During commissioning, personnel can use the supplied resolution-matched test rod to interrupt the installed miniTwin4 field and observe the resulting indication and safety-system response. The C-Fix or L-Fix brackets establish the mechanical arrangement, and optical synchronization supports alignment. The check follows the manufacturer’s full procedure across the protective field and confirms the installed control response before machine operation.
Problem Solved
A resolution-matched interruption check helps personnel verify the installed field and its connection to the machine’s stopping function, providing commissioning evidence for the actual protective arrangement.
Commissioning check
Test rod
Optical alignment