Sale!

Festo 546922 Input Module, 16 PNP Inputs, M8

Original price was: USD 354.38.Current price is: USD 304.46.

CPI digital input module with sixteen three-pin M8 sensor sockets, parameterisable input debounce, group electronic protection and diagnostic LEDs.

Festo Remote I/O and Network Interface Components

Festo CP-E16-M8-EL Input Module

BrandFesto
Model IdentifierCP-E16-M8-EL
Official Part Number546922

Technical Overview

The Festo CP-E16-M8-EL collects up to sixteen positive-switching digital inputs through sixteen three-pin M8 sensor sockets with single input assignment. Designed for Festo's CPI installation system, it receives nominal 24 V DC power through the CP connection and operates across 18–30 V DC. Input debounce is 3 ms, with 0.5, 10 and 20 ms parameterisable alternatives. Sixteen channel-status LEDs, two module-diagnostic indicators and four group-diagnostic indicators support local fault observation. The module provides electronic short-circuit protection per group, a 0.7 A maximum total current rating and reinforced-PA construction, with through-hole or DIN-rail mounting and IP65/IP67 protection under the documented connection conditions.

Sixteen-input PNP CPI module with individual three-pin M8 sensor sockets, configurable debounce and group diagnostic indicators.

Key Features

  • Sixteen PNP positive-switching digital inputs
  • Sixteen three-pin M8 sensor sockets with one input per socket
  • Nominal 24 V DC via CP connection; 18–30 V DC range
  • 3 ms input debounce with 0.5, 10 and 20 ms parameterisable settings
  • Signal 0 at ≤6 V and signal 1 at ≥8.6 V
  • Sixteen channel-status, two module-diagnostic and four group-diagnostic LEDs
  • Internal electronic short-circuit protection for each group
  • 0.7 A maximum total module current; no channel-to-channel isolation
  • Through-hole or DIN-rail mounting with reinforced-PA housing and cover
  • IP65/IP67 when fully connected or capped; −5 to 50 °C ambient range

Collect sixteen PNP sensor signals through individual M8 sockets with configurable debounce and local channel and group diagnostics.

Technical Specification Matrix

ParameterValue
Type of mountingEither:; With through-hole; via DIN rail
Ambient temperature-5 °C...50 °C
Storage temperature-20 °C...70 °C
Degree of protectionIP65; IP67
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
CE mark (see declaration of conformity)To EU EMC Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK instructions for EMC; To UK RoHS instructions
KC markKC-EMV
ApprovalRCM; c UL us - Recognised (Oil)
Certificate issuing authorityUL E239998
Note on materialsRoHS compliant
Material housingReinforced PA
Material coverReinforced PA
LED display16 Channel status; 2 Module diagnostics; 4 Group diagnostics
Max. number of inputs16
Operational voltage range DC18 V...30 V
Nominal operating voltage DC24 V
Operating voltage DC load voltage24 V
Residual ripple, load voltage4 Vss
Characteristic for inputsIEC 1131-T2
Switching levelSignal 0: <= 6 V; Signal 1: ≥ 8.6 V
Switching logic for inputsPNP (positive switching)
Input debounce time3 ms (0.5 ms, 10 ms, 20 ms, parameterisable)
Max. total current per module0.7 A
Isolation channel - channelNo
Fuse protection (short circuit)Internal electronic fuse protection for each group
Sensor connections16 × M8, 3-pin; single input assignment
Power supply interfaceVia CP connection
Intrinsic current consumptionTypically 75 mA
Diagnostic functionsCP communication; short circuit/overload; undervoltage
Protection conditionIP65/IP67 when fully plugged in or fitted with protective caps
Sensor pin allocationPin 1: 24 V; pin 3: 0 V; pin 4: input signal

Industrial Applications

1. Collecting Distributed Fixture Position Signals

An assembly fixture has several 24 V DC proximity switches that report actuator and component positions. This module collects sixteen positive-switching signals through individual three-pin M8 sockets, with one input per socket. The CP connection links the input module to the Festo installation system, while assigned channel LEDs display each local signal state for setup and observation.

Problem Solved

Individual M8 inputs consolidate the fixture's PNP sensor signals at one module, with per-channel indication making the state of each connected sensing point visible locally.

16 PNP inputs 16 × M8 three-pin Channel LEDs

2. Filtering Brief Input Transitions

A machine input receives short transitions that should be treated according to the timing needs of the process. The module offers a 3 ms input debounce time with 0.5, 10 and 20 ms parameterisable alternatives. Its documented positive-switching voltage thresholds define the digital levels, allowing the selected filtering interval and signal levels to form a known input-acquisition arrangement.

Problem Solved

Parameterisable debounce provides a defined time filter for digital transitions, allowing input acquisition to reflect the process timing instead of relying on one fixed filtering interval.

0.5/3/10/20 ms debounce PNP logic Defined voltage thresholds

3. Locating Sensor-Supply Faults during Maintenance

A station loses expected input signals and maintenance needs to distinguish sensor-supply faults from normal signal changes. The module includes electronic fuse protection per group and diagnostics for short circuit, overload, undervoltage and CP communication. Group and module indicators complement the sixteen channel-status LEDs, providing local diagnostic information at the same location as the sensor connections.

Problem Solved

Group protection and diagnostic indication help identify a sensor-supply or communication fault alongside ordinary input states, supporting fault localization at the module during maintenance.

Group electronic protection Four group LEDs CP diagnostics
Select your currency