SICK 6020478 CQ35-25NPP-KW1 Capacitive Proximity Sensor

USD 192.92

CQ35-25NPP-KW1 provides capacitive proximity sensing, complementary PNP output, 50 Hz switching and IP67 protection with adjustable sensitivity.

SKU SICK-6020478 Category
SICK CQ

SICK CQ35-25NPP-KW1 Capacitive Proximity Sensor

BrandSICK
Model IdentifierCQ35-25NPP-KW1
Official Part Number6020478

Technical Overview

The SICK CQ35-25NPP-KW1 is a rectangular capacitive proximity sensor with a complementary PNP output. It detects changes in capacitance caused by nearby material, supporting qualified detection of metal and nonmetal targets. Its specified sensing range is 4–25 mm non-flush; actual reach depends on the material and installation. A 270° sensitivity potentiometer sets sensitivity for the application. The sensor operates from 10–36 V DC with 50 Hz switching and connects through a 2 m four-wire PVC cable. Its PC housing provides IP67 protection according to EN 60529. Material reduction factors and an empty/full or target/background test guide commissioning.

Capacitive proximity sensor with complementary PNP output, 4–25 mm non-flush sensing, 270° sensitivity potentiometer and 2 m four-wire PVC cable.

Key Features

  • Rectangular capacitive proximity sensing for qualified metal and nonmetal targets
  • 4–25 mm non-flush specified sensing range
  • complementary PNP output
  • 270° sensitivity potentiometer
  • 10–36 V DC operating supply
  • 50 Hz switching
  • 2 m four-wire pvc cable
  • IP67 according to EN 60529; PC housing
  • Material-dependent sensing distance; reference reduction factors documented

Detect qualified metal or nonmetal material with adjustable capacitive sensing and a discrete switching signal for machine control.

Technical Specification Matrix

ParameterValue
Functional principleCapacitive proximity sensing
Housing designRectangular
Sensing range4–25 mm non-flush
Assured sensing distance18 mm
InstallationNon-flush
Material reduction factorsReference values, material dependent: metal 1; water 1; PVC approximately 0.4; oil approximately 0.25; glass 0.6; ceramics 0.5; alcohol 0.7; wood 0.2–0.7
Adjustment270° sensitivity potentiometer
Switching outputComplementary pnp
Electrical wiringDC, 4-wire
Switching frequency50 Hz
Power supply10–36 V DC
Residual ripple≤10%
Voltage drop≤2.5 V DC at maximum output current
Current consumption10 mA without load
Initialization time≤100 ms
Output current≤200 mA
Reproducibility≤5% of sensing range at constant supply voltage and ambient temperature
Temperature drift±10% of sensing range
Short-circuit protectionYes
Connection2 m four-wire pvc cable
Cable materialPVC; do not bend below 0 °C
Housing materialPC plastic
Sensing face materialPlastic
IP ratingIP67 according to EN 60529
Operating temperature−25 to +75 °C
Shock resistance30 g for 11 ms
Vibration resistance10–55 Hz at 1 mm amplitude
EMCEN 60947-5-2
MTTFD897 years
Diagnostic coverage DCavg0%
Mission time20 years
UL fileNRKH.E191603
Hysteresis4–20% of sensing range; varies with installation, environment and sensitivity
Power-up pulse suppressionYes
Items suppliedOne screwdriver for potentiometer adjustment
Housing width35 mm
Housing depth15 mm
Conductor cross-section0.34 mm²
Wire assignmentBN: L+; BK: NO; WH: NC; BU: M
EMC integration noteConducted interference in the oscillator frequency range may change the output signal; observe manufacturer operating instructions

Industrial Applications

1. Checking a nonmetal part in an assembly fixture

An assembly fixture can place a qualified nonmetal part near the sensing face and use the complementary PNP signal to confirm its local presence. The 270° sensitivity potentiometer adapts sensitivity to the actual target and surrounding fixture. Commissioning compares empty and occupied states at the installed spacing, taking the documented material reduction factors into account.

Problem Solved

A local presence signal helps the controller detect a missing part before the next assembly step, without requiring a metal target on the component or a contact actuator.

Part presence Nonmetal targets Capacitive sensing

2. Detecting a liquid at a point in a nonmetal vessel

A suitable nonmetal vessel can position the sensor outside its wall at the desired detection point. After testing the actual wall, liquid and spacing, the 270° sensitivity potentiometer sets a threshold between empty and filled conditions. The complementary PNP output provides a discrete point-level event to a compatible controller; the specified range remains subject to the installed materials.

Problem Solved

A qualified external point-level signal helps the process controller identify liquid reaching the monitored height while avoiding a probe inside the vessel and preserving the vessel wall.

Point level External mounting Qualified vessel wall

3. Monitoring granulate at a feed inspection window

A granulate feeder can place the sensor beside a suitable nonmetal inspection window to check whether material occupies the monitored location. The 270° sensitivity potentiometer is set using the actual granulate, window and installation spacing. Empty and filled tests, including expected moisture and buildup conditions, qualify the discrete output before it is used to coordinate feeding.

Problem Solved

A local material-presence event helps the controller identify an empty feed location or arrival of replenishment material, supporting feed sequencing without placing a mechanical paddle in the granulate.

Granulate feed Material presence Threshold setup
Select your currency