Contact Us:
sales@inosaki.com

DEK-OE- 24DC/ 48DC/100 – 2940207 – Solid-state Relay Terminal Block – Phoenix Contact Solid-state Relays And Electromechanical Relays

$ 50.60

Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.

Commercial Data

Item number 2940207
Packing unit 10 pc
Minimum order quantity 1 pc
Product key DK61A1
Catalog page Page 442 (C-5-2019)
GTIN 4017918079901
Weight per piece (including packing) 20.83 g
Weight per piece (excluding packing) 20.53 g
Customs tariff number 85364190
Country of origin CN

Notes

Note on application Use of EB 80-DIK… bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK… bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK… bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.

Product Properties

Product type Solid-state relay module
Product family DEK
Application Output function
Operating mode 100% operating factor
Insulation characteristics: Standards/regulations
Insulation Basic insulation
Overvoltage category III
Pollution degree 2
Data management status
Date of last data management 17.01.2025

Electrical Properties

Maximum power dissipation for nominal condition 10 mW
Test voltage (Input/output) 2.5 kV AC (Input/output)

Input Data

Nominal input voltage UN 24 V DC
Input voltage range in reference to UN 0.8 … 1.2
Input voltage range 19.2 V DC … 28.8 V DC
Switching threshold “0” signal in reference to UN ≤ 0.4
Switching threshold “1” signal in reference to UN ≥ 0.8
Typical input current at UN 7 mA
Typical response time 20 µs
Typical turn-off time 200 µs
Operating voltage display Green LED
Protective circuit Reverse polarity protection
Transmission frequency 300 Hz

Output Data

Contact switching type 1 N/O contact
Design of digital output electronic
Output voltage range 3 V DC … 48 V DC
Limiting continuous current 100 mA
Voltage drop at max. limiting continuous current ≤ 0.9 V
Output circuit 2-conductor floating, 3-conductor ground-referenced
Protective circuit Reverse polarity protection; Polarity protection diode
Freewheeling diode; Freewheeling diode
Output resistor approx. 22 kΩ (for 3-conductor operation)

Connection Data

Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section rigid 0.2 mm² … 2.5 mm²
Conductor cross section flexible 0.2 mm² … 2.5 mm²
Conductor cross section AWG 24 … 14
Tightening torque 0.5 Nm

Dimension

Width 6.2 mm
Height 80 mm
Depth 56 mm

Material Specifications

Color green (RAL 6021)

Environmental and real-life conditions

Ambient conditions
Ambient temperature (operation) -20 °C … 60 °C
Ambient temperature (storage/transport) -40 °C … 70 °C

 Standards And Regulations

Standards/regulations
Standards/regulations IEC 60947-5-1

Mounting

Mounting type DIN rail mounting
Assembly note in rows with zero spacing
Mounting position any

Additional information

Weight 0.02083 kg
Dimensions 5.6 × 0.62 × 8 cm

Related Products

camera-ueye-se-usb3
MOXA_Industrial-Grade USB Hubs_MOXA UPort 407
Festo_Position sensors_SDAT-MHS-M80-1L-SA-E-03-M8_1531266
SICK_sensor_Fiber-optic sensor_WLL180T_WLL180T-L434
SIE_181018 - ET200, S7-1500 (Zubehör)
camera-gige-ueye-se-rev4-boardlevel-sboard-1
Select your currency