Sale!

Festo 576081 Stopper Cylinder, 20 mm Bore, 10 mm Stroke, M3 Rod

Original price was: USD 108.94.Current price is: USD 94.38.

Double-acting spring-equipped stopper with 20 mm bore, 10 mm stroke, M3 female rod thread, proximity-switch detection and M5 pneumatic connection.

SKU Festo-576081 Category
Festo Stopper Cylinder And Feed Separator

Festo DFSP-20-10-F-PA Stopper Cylinder

BrandFesto
Model IdentifierDFSP-20-10-F-PA
Official Part Number576081

Technical Overview

The Festo DFSP-20-10-F-PA is a double-acting stopper cylinder with spring, a 20 mm piston diameter and 10 mm stroke. Its round trunnion rod has an M3 female thread, and proximity switches support piston-position detection. Elastic cushioning rings or plates act at both ends, while M5 ports connect the working air over a 1.6–10 bar operating range. The specified impact force is 1370 N, permissible lateral force during switching is 228 N and maximum cycle frequency is 5 Hz. Through-hole, female-thread or accessory mounting supports installation, with force suitability dependent on the manufacturer’s mounting and loading conditions.

20 mm bore, 10 mm stroke double-acting spring-equipped stopper with M3 female trunnion rod thread, M5 ports and proximity-switch detection.

Key Features

  • 20 mm piston diameter and 10 mm stroke
  • Double-acting with spring, pulling, as established by the manufacturer ordering table
  • Round trunnion piston rod with M3 female thread
  • Elastic cushioning rings or plates at both ends
  • Proximity-switch position-detection capability
  • 1370 N impact-force rating for the extended rod under manufacturer loading conditions
  • 228 N permissible lateral force during switching in the current exact-part datasheet
  • 5 Hz maximum cycle frequency and 1.6–10 bar operating pressure
  • M5 pneumatic connection; through-hole, female-thread or accessory mounting
  • Anodised aluminium barrel/covers, stainless-steel rod and Class 5 cleanroom suitability

Stop and release conveyed workpieces with a 10 mm spring-equipped pneumatic stroke and an M3 female-threaded trunnion rod.

Technical Specification Matrix

ParameterValue
Stroke10 mm
Piston diameter20 mm
Piston rod threadM3
CushioningElastic cushioning rings/plates at both ends
Mounting positionAny
Mode of operationDouble-acting; Pulling
DesignPiston; Piston rod; Profile barrel
Position detectionVia proximity switch
Piston-rod endFemale thread
VariantsPiston rod with female thread
Protection against torque/guideRound piston rod
Operating pressure0.16 MPa...1 MPa; 1.6 bar...10 bar
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 5 according to ISO 14644-1
Ambient temperature-10 °C...80 °C
Impact force1370 N
Permissible lateral force during switching operation228 N
Max. cycle frequency5 Hz
Type of mountingEither:; With through-hole; With female thread; With accessories
Pneumatic connectionM5
Note on materialsRoHS compliant
Material collar screwsGalvanised steel
Material coverWrought aluminium alloy; anodised
Material sealsTPE-U(PU)
Material piston rodHigh-alloy stainless steel
Material rollGalvanised steel
Material cylinder barrelWrought aluminium alloy; Smooth-anodised
Force-rating conditionsImpact rating applies to the extended rod during arrival/braking; lateral switching force applies after impact. Mounting and loading conditions govern suitability.
Piston rod variantTrunnion with M3 female thread, round rod
Spring-equipped functionDouble-acting with spring, pulling

Industrial Applications

1. Pallet Arrival at a Conveyor Workstation

A conveyor workstation needs a mechanical stop for an arriving workpiece carrier. The round trunnion rod presents the stopping interface, while the cylinder’s 10 mm stroke provides withdrawal travel. The 1370 N impact rating applies to force on the extended rod; permissible carrier mass depends on speed, buffering and the manufacturer’s mounting conditions, rather than that force alone.

Problem Solved

The raised trunnion rod provides a stopping interface and retracts to release the carrier, supporting controlled workstation entry within the documented impact, mounting and conveyor-loading conditions.

Female-threaded trunnion rod 10 mm stroke 1370 N impact rating

2. Release from a Continuing Conveyor Load

A conveyor may continue applying a lateral friction load after a carrier has stopped. The double-acting, spring-equipped cylinder withdraws its round trunnion rod, with lateral switching force specified separately from impact force. Its 228 N permissible lateral switching force is evaluated after impact, and the manufacturer’s guidance links this condition to the available pneumatic pressure and mounting arrangement.

Problem Solved

Separating the withdrawal load from the arrival impact supports a stop-release mechanism based on the relevant lateral switching condition, while the spring-equipped pneumatic drive supplies the rod movement.

Spring-equipped drive M3 female rod thread Lateral switching load

3. Position-Confirmed Transfer-Line Sequencing

A transfer line needs to coordinate a carrier-release command with the stopper’s actual piston position. This cylinder supports proximity-switch detection to observe its 10 mm travel. The controller can use compatible switch inputs to distinguish extended and withdrawn conditions, while the documented 5 Hz maximum cycle frequency defines a component limit for sequence planning.

Problem Solved

Position-detection capability provides feedback from the cylinder movement, allowing the transfer sequence to coordinate release with the observed piston position instead of relying only on a timed command.

Proximity-switch detection 10 mm stroke 5 Hz maximum
Select your currency