Sale!

Festo 576150 Stopper Cylinder, 50 mm Bore, 20 mm Stroke, Trunnion

Original price was: USD 215.02.Current price is: USD 185.12.

Single-acting pulling stopper with round piston rod and trunnion, proximity-switch position detection, G1/8 connection and 5 Hz maximum cycle frequency.

SKU Festo-576150 Category
Festo Stopper Cylinder And Feed Separator

Festo DFSP-50-20-PS-PA Stopper Cylinder

BrandFesto
Model IdentifierDFSP-50-20-PS-PA
Official Part Number576150

Technical Overview

The Festo DFSP-50-20-PS-PA is a single-acting, pulling stopper cylinder with a 50 mm piston diameter, 20 mm stroke and a round piston rod with trunnion. Proximity switches support piston-position detection, while elastic cushioning rings or plates act at both ends. Its G1/8 connection supplies compressed air within a 1.2–10 bar operating range. The current exact datasheet specifies 6280 N impact force, 1570 N permissible lateral force during switching and a maximum cycle frequency of 5 Hz. Through-hole, female-thread or accessory mounting supports installation, with force suitability dependent on the manufacturer’s mounting and loading conditions.

50 mm bore, 20 mm stroke single-acting pulling stopper cylinder with round trunnion rod, G1/8 connection and proximity-switch detection.

Key Features

  • 50 mm piston diameter and 20 mm stroke
  • Single-acting, pulling pneumatic operation
  • Round piston rod with trunnion; no anti-rotation variant
  • Elastic cushioning rings or plates at both ends
  • Proximity-switch position-detection capability
  • 6280 N impact-force rating for the extended rod under manufacturer loading conditions
  • 1570 N permissible lateral force during switching in the current exact-part datasheet
  • 5 Hz maximum cycle frequency and 1.2–10 bar operating pressure
  • G1/8 pneumatic connection; through-hole, female-thread or accessory mounting
  • Anodised aluminium barrel/covers, stainless-steel rod and Class 5 cleanroom suitability

Stop and release conveyed workpieces with a trunnion piston rod and a 20 mm single-acting pulling stroke.

Technical Specification Matrix

ParameterValue
Stroke20 mm
Piston diameter50 mm
CushioningElastic cushioning rings/plates at both ends
Mounting positionAny
Mode of operationSingle-acting; Pulling
DesignPiston; Piston rod; Profile barrel
Position detectionVia proximity switch
Protection against torque/guideRound piston rod
Operating pressure0.12 MPa...1 MPa; 1.2 bar...10 bar
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 5 according to ISO 14644-1
Ambient temperature-10 °C...80 °C
Impact force6280 N
Permissible lateral force during switching operation1570 N
Max. cycle frequency5 Hz
Type of mountingEither:; With through-hole; With female thread; With accessories
Pneumatic connectionG1/8
Note on materialsRoHS compliant
Material collar screwsGalvanised steel
Material coverWrought aluminium alloy; anodised
Material sealsTPE-U(PU)
Material piston rodHigh-alloy stainless steel
Material rollGalvanised steel
Material cylinder barrelWrought aluminium alloy; Smooth-anodised
Force-rating conditionsImpact rating applies to the extended rod during arrival/braking; lateral switching force applies after impact. Mounting and loading conditions govern suitability.
Piston rod variantTrunnion, round rod, without anti-rotation variant

Industrial Applications

1. Pallet Arrival at a Conveyor Workstation

A conveyor workstation needs a mechanical stop for an arriving workpiece carrier. The round trunnion rod presents the stopping interface, while the cylinder’s 20 mm stroke provides withdrawal travel. The 6280 N impact rating applies to force on the extended rod; permissible carrier mass depends on speed, buffering and the manufacturer’s mounting conditions, rather than that force alone.

Problem Solved

The raised trunnion rod provides a stopping interface and retracts to release the carrier, supporting controlled workstation entry within the documented impact, mounting and conveyor-loading conditions.

Trunnion piston rod 20 mm stroke 6280 N impact rating

2. Release from a Continuing Conveyor Load

A conveyor may continue applying a lateral friction load after a carrier has stopped. The single-acting pulling cylinder withdraws its round trunnion rod, with lateral switching force specified separately from impact force. The current exact-part datasheet lists 1570 N permissible lateral force during switching; the catalog explains that this condition is evaluated after impact and depends on available pneumatic pressure.

Problem Solved

Separating the withdrawal load from the arrival impact supports a stop-release mechanism based on the relevant lateral switching condition, while pneumatic pulling operation supplies the release movement.

Single-acting pulling Trunnion rod Lateral switching load

3. Position-Confirmed Transfer-Line Sequencing

A transfer line needs to coordinate a carrier-release command with the stopper’s actual piston position. This cylinder supports proximity-switch detection to observe its 20 mm travel. The controller can use compatible switch inputs to distinguish extended and withdrawn conditions, while the documented 5 Hz maximum cycle frequency defines a component limit for sequence planning.

Problem Solved

Position-detection capability provides feedback from the cylinder movement, allowing the transfer sequence to coordinate release with the observed piston position instead of relying only on a timed command.

Proximity-switch detection 20 mm stroke 5 Hz maximum
Select your currency