1. Cushioned Arrival at a Conveyor Workstation
A conveyor workstation needs to decelerate an arriving workpiece carrier before processing begins. The stopper's toggle lever transfers contact into the adjustable front shock absorber, with 15 mm cushioning travel for this size. Its vertical installation places the roller in the conveying path, while the actual permissible carrier mass depends on the manufacturer's conveying-speed and loading curves.
Problem Solved
The cushioned toggle-lever mechanism absorbs the carrier's arrival through a controlled stopping movement, providing an adjustable alternative to an uncushioned mechanical contact at the workstation.
Adjustable shock absorber
15 mm cushioning
Vertical mounting
2. Spring-assisted Reset for Repeated Carrier Stops
A transfer line must raise its stopper again after releasing one carrier so that the next can be intercepted. This exact variant includes a spring in addition to its double-acting pneumatic function. Festo also permits the spring-equipped version to operate as a single-acting drive, providing a documented reset arrangement for a stop-and-release sequence using the 30 mm stroke.
Problem Solved
The spring-assisted configuration provides a mechanical reset action alongside pneumatic operation, returning the stopping mechanism for the next carrier in the repeated stop-and-release sequence.
Spring-assisted
30 mm stroke
Single-acting use supported
3. Position-feedback Coordination of Stop and Release
A transfer line needs to coordinate carrier release with the next station and distinguish the cylinder position from the lever's contact state. This stopper supports proximity-switch piston detection and inductive sensing of the toggle lever. Double-acting movement through the 30 mm stroke supplies the commanded stop and release motion, while compatible sensors provide the corresponding machine-sequence inputs.
Problem Solved
Separate sensing provisions expose piston and lever states to the control sequence, helping coordinate release with the actual mechanism state rather than assuming both conditions from a timed command.
Proximity-switch piston sensing
Inductive lever sensing
30 mm stroke