Sale!

Festo 8133557 Radial Gripper, 180° Opening, Spring-open

Original price was: USD 339.82.Current price is: USD 291.98.

Size 25 single-acting radial gripper with spring opening, 239.5 Ncm closing torque at 6 bar, M5 port, proximity sensing and 440 g product weight.

SKU Festo-8133557 Category
Festo Radial Grippers

Festo DHRC-25-A-S-NO Radial Gripper

BrandFesto
Model IdentifierDHRC-25-A-S-NO
Official Part Number8133557

Technical Overview

The Festo DHRC-25-A-S-NO is a size 25 single-acting radial gripper with two jaws and a maximum 180° opening angle. Compressed air closes the jaws, while the integrated spring opens them in the depressurised state. The exact configuration provides 239.5 Ncm total closing torque at 6 bar, with 0.1 mm gripper repetition accuracy and a maximum operating frequency of 2 Hz. Its M5 pneumatic connection and side connection direction support integration into handling tooling. The 440 g assembly combines anodised aluminium housing components with high-alloy steel jaws, and supports proximity-switch position detection over a 1.5–8 bar operating range.

Size 25 radial gripper with two jaws, 180° maximum opening, spring-open single-acting operation and 239.5 Ncm closing torque at 6 bar.

Key Features

  • Size 25 radial mechanism with two gripper jaws
  • 180° maximum opening angle
  • Single-acting: pneumatic closing and spring opening when depressurised
  • 239.5 Ncm total closing torque at 6 bar
  • 0.1 mm gripper repetition accuracy and 0.2 mm maximum replacement accuracy
  • 2 Hz maximum operating frequency; minimum opening/closing times 147/45 ms at 6 bar
  • Position detection via proximity switch
  • M5 pneumatic connection and any mounting position
  • 140 N maximum static jaw Fz; maximum static moments Mx/Mz 7 Nm and My 4 Nm
  • 440 g product weight; 1.5–8 bar operation and −10 to 60 °C ambient range

Clear the loading area with up to 180° jaw opening and spring-driven release in the single-acting radial-gripper configuration.

Technical Specification Matrix

ParameterValue
Size25
Max. replacement accuracy0.2 mm
Max. opening angle180 deg
Rotationally symmetrical0.2 mm
Repetition accuracy, gripper0.1 mm
Number of gripper jaws2
Drive systemPneumatic
Mounting positionAny
Mode of operationSingle-acting; Open
Gripper functionRadial
Gripper force back-upDuring opening
DesignConnection direction on the side; Force pilot operated motion sequence
Position detectionVia proximity switch
Operating pressure0.15 MPa...0.8 MPa; 1.5 bar...8 bar; 21.75 psi...116 psi
Max. operating frequency of gripper2 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi)147 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi)45 ms
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Ambient temperature-10 °C...60 °C
Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi)239.5 Ncm
Mass moment of inertia1.316 kgcm²
Max. force on gripper jaw Fz static140 N
Max. torque at gripper Mx static7 Nm
Max. torque at gripper My static4 Nm
Max. torque at gripper Mz static7 Nm
Physical Weight (kg)0.44
Type of mountingEither:; Direct mounting via through-hole; Direct mounting via thread; Via through-hole and dowel pin; Via female thread and dowel pin
Pneumatic connectionM5
Note on materialsRoHS compliant
Material cover capWrought aluminium alloy, anodised
Material housingAnodised wrought aluminium alloy
Material gripper jawsHigh-alloy steel
Spring functionOpens by spring force when depressurised; compressed air closes the jaws

Industrial Applications

1. Wide-clearance Pickup from a Component Nest

A transfer head approaches a component in a nest where the gripping fingers must clear surrounding locating features. The radial mechanism opens through up to 180° before pneumatic closing brings the selected fingers around the workpiece. The two-jaw arrangement and 0.1 mm repetition accuracy support repeated pickup motion, while the actual finger geometry defines the contact with the component.

Problem Solved

Wide radial opening moves the fingers away from the pickup area, allowing access around the nest before the jaws close for external gripping and transfer.

180° maximum opening Two jaws 0.1 mm repetition

2. Spring-driven Release after Part Placement

A placement station lowers a component into a receiving fixture before releasing the transfer grip. This single-acting version closes with compressed air and opens by spring force after depressurisation. That operating sequence allows release through the documented mechanical opening action, with an M5 connection supplying the pneumatic closing command and no second powered opening chamber required.

Problem Solved

The opening spring supplies the jaw-release motion when the closing chamber is vented, providing a defined mechanical opening action after the component is supported by its receiving fixture.

Spring-open Single-acting M5 connection

3. Jaw-position Feedback for Handling Sequences

An automated handling sequence needs position feedback before moving the transfer head or feeding the next component. The gripper supports proximity-switch detection of its piston position, allowing compatible sensors to report selected movement states to the controller. Direct threaded or through-hole mounting, with dowel-pin options, provides the documented mechanical interfaces for locating the gripper on that handling head.

Problem Solved

Compatible position sensing provides movement-state feedback for the handling sequence, reducing reliance on elapsed time alone when coordinating gripper motion with adjacent machine actions.

Proximity-switch detection Dowel-pin mounting options Single-acting radial motion
Select your currency