Sale!

Festo 1310177 Angled Gripper, 40° Opening, M3

Original price was: USD 273.00.Current price is: USD 234.78.

Size 10 two-jaw gripper with 43 Ncm opening and 30 Ncm closing total torque at 6 bar, Hall-sensor position detection and 40 g product weight.

SKU Festo-1310177 Category
Festo Angled Grippers

Festo DHWS-10-A Angled Gripper

BrandFesto
Model IdentifierDHWS-10-A
Official Part Number1310177

Technical Overview

The Festo DHWS-10-A is a size 10 double-acting angled gripper with two jaws, a lever mechanism and a maximum 40° opening angle. At 6 bar, total gripping torque is 43 Ncm during opening and 30 Ncm during closing; these are torque ratings rather than linear gripping-force values. Repetition accuracy is 0.04 mm, with Hall-sensor position detection and a maximum operating frequency of 4 Hz. The 40 g assembly uses M3 connections and centring-sleeve mounting via female threads or through-holes. Hard-anodised aluminium and high-alloy steel form the housing and jaws, with operation specified at 2–8 bar and 5–60 °C ambient temperature.

Two-jaw angled gripper with 40° maximum opening, Hall-sensor position detection and 30 Ncm total closing torque at 6 bar.

Key Features

  • Size 10 angled gripper with two jaws and lever mechanism
  • 40° maximum opening angle
  • Double-acting pneumatic operation
  • 43 Ncm total opening torque at 6 bar
  • 30 Ncm total closing torque at 6 bar
  • 0.04 mm gripper repetition accuracy
  • Hall-sensor position detection
  • 4 Hz maximum frequency; 10 ms opening and 22 ms closing minimum times at 6 bar
  • M3 connections and centring-sleeve mounting
  • 40 g product weight; hard-anodised aluminium housing and high-alloy steel jaws

Move two gripping jaws through up to 40° with documented opening and closing torque in a 40 g pneumatic assembly.

Technical Specification Matrix

ParameterValue
Size10
Max. replacement accuracy0.2 mm
Max. opening angle40 deg
Rotationally symmetrical0.2 mm
Repetition accuracy, gripper0.04 mm
Number of gripper jaws2
Mounting positionAny
Mode of operationDouble-acting
Gripper functionAngled gripper
DesignLever
Position detectionVia Hall sensor
Operating pressure2 bar...8 bar
Max. operating frequency of gripper4 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi)10 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi)22 ms
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesMetals with more than 5% by mass of copper are excluded from use.; Exceptions are printed circuit boards, cables, electrical connectors and; coils.
Ambient temperature5 °C...60 °C
Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening43 Ncm
Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi)30 Ncm
Mass moment of inertia0.03 kgcm²
Max. force on gripper jaw Fz static25 N
Max. torque at gripper Mx static0.6 Nm
Max. torque at gripper My static0.6 Nm
Max. torque at gripper Mz static0.6 Nm
Physical Weight (kg)0.04
Type of mountingEither:; Via female thread and centring sleeve; Via through-hole and centring sleeve
Pneumatic connectionM3
Note on materialsRoHS compliant
Material cover capPA
Material housingWrought aluminium alloy; Hard anodised
Material gripper jawsHigh-alloy steel

Industrial Applications

1. External Pickup of Small Components

An assembly tool picks a small component using shaped fingers on the two gripper jaws. The lever mechanism provides angular closing with 30 Ncm total gripping torque at 6 bar, while the 40° maximum opening allows the fingers to move clear for approach and release. The actual finger length and contact geometry determine the resulting force at the component.

Problem Solved

Angular jaw movement supplies a compact opening and closing mechanism for the pickup tool, with documented torque and travel defining the mechanical basis for its contact fingers.

Two jaws 30 Ncm closing at 6 bar 40° maximum opening

2. Opening-Driven Grip inside a Component Opening

A handling tool needs to contact a component from inside an accessible opening while leaving its outer faces free. The double-acting gripper supplies powered jaw opening with 43 Ncm total torque at 6 bar. Appropriately shaped fingers translate that angular opening into the required internal contact arrangement, while the 0.6 Nm static jaw-moment limits provide separate tooling-load constraints.

Problem Solved

Powered opening provides the mechanical action for an internal contact arrangement, allowing the selected fingers to handle the component while preserving access to its outer faces.

43 Ncm opening at 6 bar Double-acting Angular jaw movement

3. Position-Observed Release into an Assembly Nest

An assembly station must coordinate component release with the next fixture action. The gripper supports Hall-sensor position detection, providing a documented method for observing the jaw state. Its 0.04 mm repetition accuracy characterizes repeated gripper movement, while female-thread or through-hole mounting with centring sleeves locates the 40 g assembly on the handling tool for recurring loading and release movements.

Problem Solved

Supported jaw-position detection provides feedback for coordinating release, while repeatability and located mounting give defined mechanical characteristics for the recurring nest-loading sequence.

Hall-sensor detection 0.04 mm repetition Centring-sleeve mounting
Select your currency