1. External Pickup of Small Components
An assembly tool picks a small component using shaped fingers on the two gripper jaws. The lever mechanism provides angular closing with 356 Ncm total gripping torque at 6 bar, while the 40° maximum opening allows the fingers to move clear for approach and release. The actual finger length and contact geometry determine the resulting force at the component.
Problem Solved
Angular jaw movement supplies a compact opening and closing mechanism for the pickup tool, with documented torque and travel defining the mechanical basis for its contact fingers.
Two jaws
356 Ncm closing at 6 bar
40° maximum opening
2. Opening-Driven Grip inside a Component Opening
A handling tool needs to contact a component from inside an accessible opening while leaving its outer faces free. The double-acting gripper supplies powered jaw opening with 386 Ncm total torque at 6 bar. Appropriately shaped fingers translate that angular opening into the required internal contact arrangement, while the 3.6 Nm static jaw-moment limits provide separate tooling-load constraints.
Problem Solved
Powered opening provides the mechanical action for an internal contact arrangement, allowing the selected fingers to handle the component while preserving access to its outer faces.
386 Ncm opening at 6 bar
Double-acting
Angular jaw movement
3. Position-Observed Release into an Assembly Nest
An assembly station must coordinate component release with the next fixture action. The gripper supports proximity-switch position detection, providing a documented method for observing the jaw state. Its 0.04 mm repetition accuracy characterizes repeated gripper movement, while female-thread or through-hole mounting with centring sleeves locates the 258 g assembly on the handling tool for recurring loading and release movements.
Problem Solved
Supported jaw-position detection provides feedback for coordinating release, while repeatability and located mounting give defined mechanical characteristics for the recurring nest-loading sequence.
Proximity-switch detection
0.04 mm repetition
Centring-sleeve mounting