1. Following a container surface level
A container can present a sufficiently reflecting material surface inside the remission-dependent range and use the 4–20 mA output as a distance reference for external level control. The controller derives level from the installed geometry and taught analog span. Actual surface return,averaging,warm-up and theload≤300 Ω receiving input are checked before selecting process thresholds.
Problem Solved
An analog surface-distance value lets external process control follow changing fill level across a taught span,supplying information for replenishment or filling decisions between fixed switching events.
Level trend
Analog distance
External geometry
2. Estimating roll size from its outer surface
A roll station can aim the sensor at the outer material surface and send the selected 4–20 mA signal to external evaluation. With the roll axis and sensor reference fixed,the controller derives a roll-size estimate from measured distance. The actual surface remission determines usable range,and averaging is selected after checking the rotating material return and required response.
Problem Solved
A distance-derived roll-size estimate gives external unwind or rewind control a changing material reference,helping it follow consumption or build-up beyond a single fixed end-of-roll threshold.
Roll surface
External calculation
Averaging
3. Combining position feedback with a switching condition
A moving machine assembly can present a natural target within the appropriate remission-dependent range. The analog output passes distance information to an external positioning controller,while the single NPN output reports a taught distance condition for sequence coordination. The controller implements correction;the actual target,receiving load,≥4 ms output-time bound and selected averaging are validated for the intended movement.
Problem Solved
Providing analog distance information alongside a taught switching event lets external control follow position continuously and coordinate a selected sequence condition from the same measured target reference.
Position feedback
Switching event
External control