USD 10.70
Straight push-in reducer bridging 12mm to 8mm O.D. tubing. Built with PBT housing, NBR seal, and handles -0.95 to 8 bar pressure at -5 to 60°C.
Straight push-in reducer bridging 12mm to 8mm O.D. tubing. Built with PBT housing, NBR seal, and handles -0.95 to 8 bar pressure at -5 to 60°C.
| Parameter | Value |
|---|---|
| Nominal Size | 7.1 mm |
| Design | Straight design, Push-pull principle |
| Operating Pressure | -0.95 to 8 bar (-0.095 to 0.8 MPa) |
| Ambient Temperature | -5 °C to 60 °C |
| Pneumatic Connection 1 | For tubing outer diameter 12 mm |
| Pneumatic Connection 2 | For tubing outer diameter 8 mm |
| Operating Medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Corrosion Resistance Class (CRC) | 1 - Low corrosion stress |
| Cleanroom Suitability | Class 4 according to ISO 14644-1 |
| Housing Material | PBT |
| Tubing Clamp Component | Stainless steel |
| Tubing Seal Material | NBR |
| Physical Weight (kg) | 0.01 |
| Dimensions L x W x H (cm) | 0 x 0 x 0 |
In high-speed packaging machinery, stepping down main pneumatic supply lines to individual actuators requires compact, leak-free fittings.
Eliminates pressure drops and leakage when adapting 12 mm trunk lines to 8 mm branches feeding discrete pneumatic cylinders.
Wafer transport mechanisms operate within strictly controlled cleanrooms, demanding pneumatic components that do not emit particulate matter.
Ensures Class 4 ISO 14644-1 cleanroom compliance while distributing control air from 12 mm sources to 8 mm end-effectors without contamination.
Articulated robots utilizing vacuum or pneumatic grippers need lightweight and reliable tube reducers near the dynamic tooling interface.
Reduces parasitic mass at the end-of-arm tooling with its 11.98 g lightweight footprint, securely connecting the 12 mm main line to 8 mm gripper lines.
