SICK 1059924 GL6G-P1211 PNP Transparent-Object Sensor

USD 61.10

GL6G-P1211 detects transparent objects with >20% beam attenuation, PNP output, a 270° sensitivity control, 1,000 Hz switching and a 2 m cable.

SKU SICK-1059924 Category
SICK G6

SICK GL6G-P1211 Transparent-Object Photoelectric Sensor

BrandSICK
Model IdentifierGL6G-P1211
Official Part Number1059924

Technical Overview

The SICK GL6G-P1211 is a polarised retro-reflective photoelectric sensor designed for detecting transparent objects that attenuate the beam by more than 20%. Its 650 nm PinPoint LED sends visible red light toward a reflector, and the receiver evaluates the returned light as the target enters the path. A 270° potentiometer adjusts sensitivity, while selectable light/dark switching provides a PNP output for machine control. The documented 0.07–5 m sensing range uses a PL80A reflector; distance depends on reflector type. A 2 m cable, 1,000 Hz switching frequency and IP67 ABS/PC housing support packaging equipment integration.

PNP retro-reflective sensor for transparent targets with >20% beam attenuation, sensitivity adjustment, 1,000 Hz switching and a 2 m cable.

Key Features

  • Transparent-object detection with >20% beam attenuation
  • 650 nm visible red PinPoint LED
  • 0.07–5 m sensing range with PL80A reflector
  • 0.03–6 m maximum range with PL80A reflector
  • Ø 8 mm light spot at 350 mm
  • PNP output; selectable light/dark switching
  • Response < 625 µs; 1,000 Hz switching frequency
  • 10–30 V DC; 2 m PVC cable
  • IP67 ABS/PC housing; −25 to +55 °C operation
  • 270° sensitivity potentiometer

Detect transparent targets through changes in reflected red light, with adjustable sensitivity for objects producing more than 20% beam attenuation.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric retro-reflective sensor; dual-lens system with minimum reflector distance
Sensing range0.07–5 m with PL80A reflector
Maximum sensing range0.03–6 m with PL80A reflector
Light sourcePinPoint LED, visible red light
Wavelength650 nm
Light spot sizeØ 8 mm at 350 mm
AdjustmentPotentiometer, 270°
Power supply10–30 V DC; short-circuit-protected network, max. 8 A
Residual ripple±10%; remain within supply-voltage limits
Current consumption30 mA, without load
Protection classIII
Switching outputPNP
Switching modeLight/dark switching; selectable via rotary selector
Output current≤ 100 mA; maximum 50 mA above 24 V supply
Response time< 625 µs with resistive load
Switching frequency1,000 Hz at light/dark ratio 1:1
Circuit protectionSupply and input/output reverse-polarity protection; output overcurrent and short-circuit protection
Housing formRectangular
Connection3-wire, 2 m cable; brown L+, blue M, black Q
Housing materialABS/PC plastic
Front screen materialPMMA plastic
Cable materialPVC plastic; do not bend below 0 °C
IP ratingIP67
Operating temperature−25 to +55 °C; temperature stability after adjustment ±10 °C
Storage temperature−40 to +70 °C
MountingM3 mounting holes
IndicatorsGreen supply-voltage LED; yellow received-light indicator
Output signal voltageSupply voltage minus ≤ 3 V / approximately 0 V (HIGH/LOW)
Physical Weight (kg)0.06
Dimensions L x W x H (cm)2.1 x 1.2 x 3.15
Polarisation filterYes
Reflector selectionSensing distance depends on reflector type; quoted 5 m/6 m ranges require PL80A
MTTFD1,630 years
Diagnostic coverage DCavg0%
Mission time20 years
Conductor cross-section0.14 mm²
Special applicationDetecting transparent objects
Required beam attenuation> 20%

Industrial Applications

1. Counting clear containers on a packaging line

A packaging conveyor needs a switching event for each separated clear container even though the container transmits some light. The sensor evaluates attenuation in the beam returned by a reflector rather than requiring complete blockage. With containers producing more than 20% beam attenuation, the sensitivity potentiometer sets the detection threshold and the switching output supplies count events to the controller.

Problem Solved

The sensor converts a qualifying reduction in returned light into a discrete event, allowing the machine to count transparent containers that do not fully block an ordinary optical path.

Transparent-object detection > 20% attenuation PNP

2. Monitoring transparent film continuity

A film feeder can monitor a fixed location where a transparent web crosses the beam between sensor and reflector. Film that reduces the returned beam by more than 20% creates a detectable state relative to the empty path. Sensitivity adjustment accommodates the installed optical path, and light/dark switching provides the chosen electrical logic for a web-present or web-missing signal.

Problem Solved

Loss of the qualifying film attenuation changes the switching state when the web runs out or breaks, giving the feeder controller an electrical indication of interrupted material supply.

270° adjustment Light/dark switching Film presence

3. Detecting accumulation of transparent trays

At a packaging transfer, a transparent tray remaining between sensor and reflector can indicate that the downstream position is occupied. The tray must attenuate the beam by more than 20% for this sensing mode. The machine controller evaluates how long the signal persists, while IP67 protection and a 2 m cable support mounting beside the transfer mechanism.

Problem Solved

A sustained attenuation signal lets the controller identify a tray held at the transfer point, helping coordinate upstream release when transparent packaging remains in the monitored position.

IP67 2 m cable Occupancy duration
Select your currency