Sale!

Festo 3720 One-Way Flow Control Valve, G1/2 Female, 1620 l/min

Original price was: USD 85.80.Current price is: USD 74.36.

Knurled-screw valve with G1/2 female ports, 1620 l/min controlled-direction nominal flow, 2760 l/min opposite flow and through-hole mounting.

SKU Festo-3720 Category
Festo Flow Control Valves

Festo GR-1/2 One-Way Flow Control Valve

BrandFesto
Model IdentifierGR-1/2
Official Part Number3720

Technical Overview

The Festo GR-1/2 is a manually adjustable one-way flow control valve with G1/2 female connections at both ports. Its knurled screw sets the restriction, with 1620 l/min standard nominal flow in the controlled direction and a separate 2760 l/min opposite-direction nominal rating. Through-hole mounting places the adjustment at the required location in any mounting position. The 517 g valve has a die-cast zinc housing and a brass adjusting screw, and operates from 0.1 to 10 bar with ambient and media temperatures from −20 to 75 °C.

G1/2 female-thread one-way flow control valve with knurled adjustment, 1620 l/min controlled nominal flow and through-hole mounting.

Key Features

  • One-way flow control function
  • G1/2 female connections at ports 1 and 2
  • Knurled screw for manual restriction adjustment
  • 1620 l/min standard nominal controlled-direction flow
  • 2760 l/min opposite-direction standard nominal rating
  • 0.1–10 bar operating range
  • Through-hole mounting in any position
  • −20 to 75 °C ambient and media temperatures
  • Die-cast zinc housing and brass adjusting screw
  • 517 g product weight and VDMA24364-B1/B2-L PWIS conformity

Set directional pneumatic flow manually through a knurled screw and G1/2 female ports on a through-hole-mounted valve.

Technical Specification Matrix

ParameterValue
Valve functionOne-way flow control function
Pneumatic connection, port 1Female thread G1/2
Pneumatic connection, port 2Female thread G1/2
Adjustment componentKnurled screw
Type of mountingWith through-hole
Standard nominal flow rate in flow control direction1620 l/min
Standard nominal flow rate in blocked direction2760 l/min
Operating pressure0.01 MPa...1 MPa; 0.1 bar...10 bar; 1.45 psi...145 psi
Ambient temperature-20 °C...75 °C
Material housingDie-cast zinc
Explosion protectionThe information in the certificate must be observed!; Zone 1 (ATEX); Zone 2 (ATEX); Zone 21 (ATEX); Zone 22 (ATEX)
Mounting positionAny
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-20 °C...75 °C
Physical Weight (kg)0.517
Note on materialsRoHS compliant
Material adjusting screwBrass
Material nutGalvanised steel

Industrial Applications

1. Metered Travel of a Pneumatic Slide

A pneumatic slide needs a controlled working stroke rather than unrestricted exhaust discharge. Installed in a suitable actuator exhaust path, this valve provides an adjustable restriction through its knurled adjustment screw. The G1/2 connections fit the corresponding circuit connections, and the documented 1620 l/min standard nominal controlled flow characterizes the selected valve size.

Problem Solved

Adjustable exhaust restriction gives the machine builder a local means of setting pneumatic travel behavior, while the knurled screw provides direct manual adjustment.

Exhaust-air metering 1620 l/min nominal Knurled screw

2. Pneumatic Volume Charging and Reverse Flow

A pneumatic fixture charges a small working volume through an adjustable restriction and subsequently permits air to flow back through the same line. The one-way flow-control function distinguishes the throttled and opposite flow directions. The manufacturer specifies 1620 l/min nominal controlled flow and a separate 2760 l/min opposite-direction nominal rating, characterising the two component flow paths.

Problem Solved

Directional throttling adjusts incoming flow while providing a different reverse-flow path, giving the fixture distinct charging and return-flow behaviour through the same pair of connections.

One-way function 1620 l/min controlled 2760 l/min opposite

3. Accessible Flow Setting on a Machine Bracket

A machine needs a fixed manual restriction setting at a location accessible during setup. Through-hole mounting secures the valve body to a suitable machine bracket, and its knurled screw provides the adjustment interface. Two G1/2 female ports connect the selected branch, with a 0.1–10 bar operating range and 517 g product weight providing concrete installation data.

Problem Solved

A fixed mounting point keeps the manual flow adjustment accessible during setup, allowing the operator to set the directional restriction without repositioning the connected valve body.

Through-hole mounting Knurled screw G1/2 ports
Select your currency