Sale!

Festo 6308 One-Way Flow Control Valve, G3/8 Female, 1010 l/min

Original price was: USD 55.38.Current price is: USD 48.10.

Knurled-screw valve with 1010 l/min controlled-direction nominal flow, G3/8 female ports, panel or through-hole mounting and 0.1–10 bar operation.

SKU Festo-6308 Category
Festo Flow Control Valves

Festo GR-3/8-B One-Way Flow Control Valve

BrandFesto
Model IdentifierGR-3/8-B
Official Part Number6308

Technical Overview

The Festo GR-3/8-B is a manually adjustable one-way flow control valve with G3/8 female connections at both ports. Its knurled screw sets the restriction, with 1010 l/min standard nominal flow in the controlled direction and a separate 1150 l/min opposite-direction nominal rating. Front-panel or through-hole mounting places the adjustment at the required location in any mounting position. The 225 g valve has a die-cast zinc housing and a brass adjusting screw, and operates from 0.1 to 10 bar with ambient and media temperatures from −20 to 75 °C.

G3/8 female-thread one-way flow control valve with knurled adjustment, 1010 l/min controlled nominal flow and panel or through-hole mounting.

Key Features

  • One-way flow control function
  • G3/8 female connections at ports 1 and 2
  • Knurled screw for manual restriction adjustment
  • 1010 l/min standard nominal controlled-direction flow
  • 1150 l/min opposite-direction standard nominal rating
  • 0.1–10 bar operating range
  • Front-panel or through-hole mounting in any position
  • −20 to 75 °C ambient and media temperatures
  • Die-cast zinc housing and brass adjusting screw
  • 225 g product weight and VDMA24364-B1/B2-L PWIS conformity

Place one-way pneumatic flow adjustment at an accessible panel using a knurled screw and G3/8 female connections.

Technical Specification Matrix

ParameterValue
Valve functionOne-way flow control function
Pneumatic connection, port 1Female thread G3/8
Pneumatic connection, port 2Female thread G3/8
Adjustment componentKnurled screw
Type of mountingEither:; Front panel mounting; With through-hole
Standard nominal flow rate in flow control direction1010 l/min
Standard nominal flow rate in blocked direction1150 l/min
Operating pressure0.01 MPa...1 MPa; 0.1 bar...10 bar; 1.45 psi...145 psi
Ambient temperature-20 °C...75 °C
Material housingDie-cast zinc
Explosion protectionThe information in the certificate must be observed!; Zone 1 (ATEX); Zone 2 (ATEX); Zone 21 (ATEX); Zone 22 (ATEX)
Mounting positionAny
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Media temperature-20 °C...75 °C
Physical Weight (kg)0.225
Note on materialsRoHS compliant
Material adjusting screwBrass

Industrial Applications

1. Metered Travel of a Pneumatic Slide

A pneumatic slide needs a controlled working stroke rather than unrestricted exhaust discharge. Installed in a suitable actuator exhaust path, this valve provides an adjustable restriction through its knurled adjustment screw. The G3/8 connections fit the corresponding circuit connections, and the documented 1010 l/min standard nominal controlled flow characterizes the selected valve size.

Problem Solved

Adjustable exhaust restriction gives the machine builder a local means of setting pneumatic travel behavior, while the knurled screw provides direct manual adjustment.

Exhaust-air metering 1010 l/min nominal Knurled screw

2. Pneumatic Volume Charging and Reverse Flow

A pneumatic fixture charges a small working volume through an adjustable restriction and subsequently permits air to flow back through the same line. The one-way flow-control function distinguishes the throttled and opposite flow directions. The manufacturer specifies 1010 l/min nominal controlled flow and a separate 1150 l/min opposite-direction nominal rating, characterising the two component flow paths.

Problem Solved

Directional throttling adjusts incoming flow while providing a different reverse-flow path, giving the fixture distinct charging and return-flow behaviour through the same pair of connections.

One-way function 1010 l/min controlled 1150 l/min opposite

3. Panel-accessible Pneumatic Adjustment

A machine operator needs access to a pneumatic restriction during setup without reaching into the internal tube layout. This valve supports front-panel mounting and has a knurled adjustment screw. Its two G3/8 female ports connect the selected branch behind the panel, while the alternative through-hole mounting method accommodates a fixed machine bracket when a panel interface is unnecessary.

Problem Solved

The documented mounting choices place manual flow adjustment at an accessible location, giving the machine a practical interface for setting directional pneumatic restriction during setup.

Front-panel mounting Knurled screw G3/8 ports
Select your currency