1. Inert-Gas Purge Adjustment
A process enclosure needs a manually set inert-gas purge through a suitable pneumatic line. The GRPO explicitly permits inert gas and provides a scaled rotary knob for adjusting restriction. G1/8 connections and the published controlled-direction flow ratings characterize the selected valve, while its −10 to +50 °C media range defines the documented thermal condition for the gas passing through it.
Problem Solved
Manual restriction provides a local means of setting the purge flow path, with a scaled adjustment reference and manufacturer-documented compatibility with inert gas as the operating medium.
Inert gas
Scaled rotary knob
G1/8 ports
2. Adjustable Air Supply for a Pneumatic Test Fixture
A test fixture needs to vary the restriction in an unlubricated compressed-air branch between test setups. This manual valve provides a rotary scale as a reference for the selected setting, with 75.8 l/min standard nominal controlled flow and a separate 38 l/min rating at 1-to-0 bar. The published ratings characterize the valve; the scale does not independently measure actual branch flow.
Problem Solved
The scaled manual adjustment gives the test fixture a defined local restriction setting reference, while pressure-specific flow ratings support evaluation of the selected pneumatic branch.
75.8 l/min nominal
38 l/min at 1-to-0 bar
Unlubricated air
3. Metering a Low-Pressure Reverse-Flow Branch
A pneumatic circuit needs manual flow restriction in a branch whose routing passes from port 2 toward port 1. Festo specifies a distinct 0–0.5 bar operating range for that direction, rather than the general 0–8 bar rating. The G1/8 interfaces and any-position mounting support the physical arrangement, while the directional pressure limit defines the supported reverse-flow condition of this exact valve.
Problem Solved
The documented reverse-direction range provides a supported basis for low-pressure branch metering, keeping the actual flow direction tied to its own pressure limit during circuit design.
Port 2 → port 1
0–0.5 bar
Manual metering