SICK 1065860 GTB10-N4211 NPN Background Suppression Sensor

USD 82.68

GTB10-N4211 offers 100–950 mm reference-white sensing, 625 nm red PinPoint LED light, five-turn range adjustment, selectable NPN switching and M12 connection.

SKU SICK-1065860 Category
SICK G10

SICK GTB10-N4211 NPN Background Suppression Sensor

BrandSICK
Model IdentifierGTB10-N4211
Official Part Number1065860

Technical Overview

The SICK GTB10-N4211 is a photoelectric proximity sensor with background suppression and a single NPN output. Reference-white sensing spans 100–950 mm, with a 20–950 mm maximum range and shorter distances for gray and black targets. Its 625 nm red PinPoint LED produces an 8 mm spot at 700 mm. A five-turn potentiometer adjusts sensing distance and a separate selector chooses light or dark switching. Response is no more than 500 µs with resistive load, with 1,000 Hz switching at a 1:1 light/dark ratio. The 10–30 V DC device uses an M12 four-pin male connector, an IP67 ABS/PMMA housing and 4.2 mm mounting holes. Operation spans −30 to +60 °C.

NPN background-suppression sensor with 100–950 mm reference-white sensing, five-turn range adjustment, selectable light/dark switching and M12 four-pin connector.

Key Features

  • Photoelectric proximity sensing with background suppression
  • 100–950 mm sensing; 20–950 mm maximum range on reference white
  • 625 nm red PinPoint LED; Ø8 mm spot at 700 mm
  • Five-turn sensing-range potentiometer; separate light/dark selector
  • Single NPN output; ≤100 mA
  • ≤500 µs response with resistive load; 1,000 Hz at 1:1 light/dark ratio
  • 10–30 V DC; 20 mA consumption; M12 four-pin male connector
  • ABS/PMMA housing; IP67; Ø4.2 mm mounting holes
  • −30 to +60 °C operation; −40 to +70 °C storage

Adjust the sensing distance to detect a nearby target while suppressing a farther background, then connect the selected NPN state to external control.

Technical Specification Matrix

ParameterValue
Functional principlePhotoelectric proximity sensor with background suppression
Sensing range100–950 mm on 90% remission reference white (DIN 5033)
Maximum sensing range20–950 mm on 90% remission reference white (DIN 5033)
Reference-target rangesSensing / maximum: white 90% 100–950 / 20–950 mm; gray 18% 100–675 / 40–675 mm; black 6% 100–525 / 60–525 mm
Light sourceVisible red PinPoint LED
Wavelength625 nm
Light spot sizeØ8 mm at 700 mm
AdjustmentSensing-range potentiometer, five turns
LED service lifeAverage 100,000 h at ambient +25 °C
Switching outputNPN
Switching modeLight or dark switching, selectable via rotary selector
Output current≤100 mA
Response time≤500 µs with resistive load
Switching frequency1,000 Hz at 1:1 light/dark ratio
Power supply10–30 V DC; limit values in a short-circuit-protected network, maximum 8 A
Ripple<5 Vpp; remain within supply tolerances
Current consumption20 mA
ConnectionM12 four-pin male connector
Pin assignmentCD-066: 1 BN=L+; 2 WH=not connected; 3 BU=M; 4 BK=Q
Circuit protectionA: supply reverse-polarity protection; B: inputs and output reverse-polarity protection; C: interference suppression; D: outputs overcurrent and short-circuit protection
Housing materialABS/PMMA plastic
IP ratingIP67
MountingØ4.2 mm mounting holes
IndicatorsYellow: received-light status; green: power on
Operating temperature−30 to +60 °C
Storage temperature−40 to +70 °C
Protection classIII
EMCEN 60947-5-2
UL filesNRKH.E348498 and NRKH7.E348498
Physical Weight (kg)0.035

Industrial Applications

1. Confirming a component in an assembly nest

An assembly nest can present a component at a repeatable distance facing the sensor. Background suppression provides a switching condition from one mounting side, while the documented adjustment establishes detection for representative components. External inspection logic samples the output after the component settles. Setup verifies actual target reflectance, placement tolerance and background geometry before accepting the installed detection point.

Problem Solved

A component-present reference helps external inspection logic distinguish an occupied assembly location from an empty nest, using commissioned target geometry and the documented adjustment method.

Assembly presence Background suppression External inspection

2. Counting separated components on a guide

A component guide can move separated parts through the optical sensing point and send switching transitions to external counting electronics. Commissioning establishes the working gap and adjustment using representative materials, including the darkest expected target. Part transit time and gaps are checked against the documented response and switching-frequency conditions before setting the counting logic.

Problem Solved

A discrete optical passage signal helps external counting electronics register separated components, using a commissioned sensing point and timing conditions matched to the actual parts feed.

Part counting Target reflectance Timing checks

3. Confirming a carrier at its transfer stop

A transfer stop can bring a defined carrier surface into the sensor’s working distance. External sequencing logic reads the optical switching state after the carrier reaches its seated position. Setup uses the documented adjustment and verifies actual carrier reflectance, gap tolerance and background geometry, then confirms that the selected light/dark behavior matches the connected process input.

Problem Solved

A seated-carrier condition helps external sequencing logic coordinate the next transfer step, using a checked optical gap and switching behavior for the actual carrier surface.

Carrier arrival Transfer stop Process sequencing
Select your currency