SICK 1064697 GTE10-P4211 PNP Diffuse Photoelectric Sensor

USD 59.80

GTE10-P4211 offers PNP diffuse sensing, 40–950 mm reference-white range, a 270° potentiometer, 1,000 Hz switching and an M12 four-pin connector.

SKU SICK-1064697 Category
SICK G10

SICK GTE10-P4211 PNP Diffuse Photoelectric Sensor

BrandSICK
Model IdentifierGTE10-P4211
Official Part Number1064697

Technical Overview

The SICK GTE10-P4211 is an energetic photoelectric proximity sensor with a PNP switching output and visible red PinPoint LED illumination. The sensor evaluates light reflected by the target from one mounting side, avoiding a separate receiver or reflector across the detection area. Its specified 40–950 mm sensing range and 20–1,300 mm maximum range apply to a white reference target having 90% remission. A 270° sensitivity potentiometer and selectable light/dark switching adapt detection and control logic. The 625 nm light source, response of no more than 500 µs, 1,000 Hz switching at a 1:1 light/dark ratio, an M12 four-pin male connector and IP67 ABS/PMMA housing support machine integration.

PNP energetic photoelectric sensor with 40–950 mm reference-target range, sensitivity adjustment, 1,000 Hz switching, M12 four-pin male connector and IP67 housing.

Key Features

  • Energetic reflected-light detection
  • 40–950 mm sensing range on 90% remission reference white
  • 20–1,300 mm maximum range on 90% remission reference white
  • 625 nm visible red PinPoint LED
  • Ø 28 mm spot at 1,400 mm
  • 270° sensitivity potentiometer
  • PNP output with selectable light/dark switching
  • Response ≤500 µs with resistive load; 1,000 Hz at 1:1 light/dark ratio
  • 10–30 V DC operation; M12 four-pin male connector
  • IP67 ABS/PMMA housing; −30 to +60 °C operation

Detect targets from one mounting side with adjustable reflected-light sensing and a PNP switching signal for the machine controller.

Technical Specification Matrix

ParameterValue
Functional principleEnergetic photoelectric proximity sensor
Maximum sensing range20–1,300 mm on 90% remission white target (DIN 5033)
Light sourcePinPoint LED, visible red light
Wavelength625 nm
Light spot sizeØ 28 mm at 1,400 mm
AdjustmentPotentiometer, 270°
Power supply10–30 V DC; short-circuit-protected network, max. 8 A
Residual ripple< 5 Vpp; remain within supply-voltage limits
Current consumption20 mA
Switching outputPNP
Switching modeLight/dark switching; selectable via selector
Output current≤ 100 mA
Response time≤ 500 µs with resistive load
Switching frequency1,000 Hz at light/dark ratio 1:1
ConnectionM12 four-pin male connector
Circuit protectionSupply/input/output reverse-polarity protection, interference suppression and output overcurrent/short-circuit protection
Protection classIII
Housing formRectangular
Housing materialABS/PMMA plastic
IP ratingIP67
EMC standardEN 60947-5-2
Operating temperature−30 to +60 °C
Storage temperature−40 to +70 °C
UL fileNRKH.E348498 & NRKH7.E348498
Conditional standardUL325 when used with a sturdy protective hood, for example BEF-G10WSG (2071960)
Sensing range40–950 mm on 90% remission white target (DIN 5033)
Pin assignmentCD-066: 1 BN=L+; 2 WH=not connected; 3 BU=M; 4 BK=Q
MountingØ4.2 mm mounting holes
IndicatorsGreen: power on; yellow: received-light status
LED service lifeAverage 100,000 h at ambient +25 °C
Physical Weight (kg)0.035

Industrial Applications

1. Part arrival at an assembly fixture

An assembly station needs a signal when an opaque component reaches its loading position. The energetic photoelectric sensor illuminates the target and evaluates the reflected red light from the same mounting side. Its 270° sensitivity potentiometer adapts detection to the installed target and distance, while the switching output reports arrival to the machine sequence.

Problem Solved

A single sensor body provides a contactless arrival signal where mounting a separate receiver is inconvenient, helping the controller start the next assembly step with the component present.

Energetic sensing 270° potentiometer Red light

2. Opaque package counting on a short-range conveyor

A conveyor carrying separated opaque packages can use reflected-light detection to create an event as each package passes the sensing position. The 1,000 Hz switching frequency and response of no more than 500 µs support distinct signal transitions within the specified timing limits. A visible red spot helps locate the detection point during installation without a receiver on the opposite side.

Problem Solved

Package passages become electrical switching events for a machine counter, while one-sided optical installation reduces the hardware needed across a narrow conveyor or enclosed transport path.

1,000 Hz ≤ 500 µs One-sided sensing

3. Detecting a nearly empty parts chute

A parts feeder can monitor whether opaque components remain at a selected height in its supply chute. With a stable target surface and a clear optical view, reflected-light detection changes state when that location empties. Selectable light/dark switching supports the desired controller logic, and the IP67 housing protects the sensor at an exposed machine mounting point.

Problem Solved

A discrete presence signal at the selected chute height supports replenishment requests before the feed path empties completely, reducing reliance on repeated manual visual inspection.

IP67 Light/dark switching Parts presence
Select your currency