Sale!

Festo 153457 Check Valve, QS-10 to R3/8, 1700 l/min

Original price was: USD 61.10.Current price is: USD 53.30.

Screw-in non-return valve with flow from QS-10 to male R3/8, 0.1 bar minimum opening differential, anodised aluminium housing and 47 g weight.

SKU Festo-153457 Category
Festo Check Valves

Festo HB-3/8-QS-10 Check Valve

BrandFesto
Model IdentifierHB-3/8-QS-10
Official Part Number153457

Technical Overview

The Festo HB-3/8-QS-10 is a screw-in pneumatic check valve connecting a QS-10 push-in port to an R3/8 male thread. The HB flow direction runs from the push-in connection toward the threaded connection, with a non-return function opposing reverse flow. Standard nominal flow is 1700 l/min, and the manufacturer specifies minimum differential pressures of 0.1 bar for opening and 0.2 bar for closing. The 47 g valve uses an anodised aluminium housing and operates from −1 to 10 bar within a 0–60 °C ambient range. It is specified for compressed air to ISO 8573-1 [7:-:-], with lubricated operation permitted under the stated medium conditions.

QS-10 to R3/8 screw-in check valve with 1700 l/min nominal flow and 0.1 bar minimum opening differential pressure.

Key Features

  • Non-return valve function
  • HB permitted flow direction: QS push-in connector toward male thread
  • QS-10 port 1 and R3/8 port 2
  • 1700 l/min standard nominal flow to DIN 1343
  • 0.1 bar minimum opening differential pressure
  • 0.2 bar minimum closing differential pressure
  • −1 to 10 bar operating-pressure range
  • Screw-in mounting with anodised aluminium housing
  • 47 g product weight and 0–60 °C ambient range

Permit flow from 10 mm tubing toward an R3/8 component port while opposing return flow through one compact screw-in valve.

Technical Specification Matrix

ParameterValue
Valve functionWith non-return function
Pneumatic connection, port 1QS-10
Pneumatic connection, port 2R3/8
Type of mountingScrew-in
Standard nominal flow rate (standardised to DIN 1343)1700 l/min
Operating pressure-1 bar...10 bar
Ambient temperature0 °C...60 °C
Material housingAnodised aluminium
Housing colourSilver
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]
Min. diff. pressure, opening0.1 bar
Min. diff. pressure, closing0.2 bar
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Physical Weight (kg)0.047
Note on materialsRoHS compliant
Permitted flow directionQS push-in connector to male thread

Industrial Applications

1. Opposing Backflow from a Charged Branch

A pneumatic branch connected at the threaded side can remain pressurized when the upstream tubing supply falls. The HB valve permits charging flow from its QS-10 connection toward the R3/8 component port and opposes the reverse direction. Its documented opening and closing differential pressures characterize that passive non-return action without an electrical control signal.

Problem Solved

The non-return mechanism opposes discharge back through the supply connection when pressure reverses, providing a passive directional boundary between the tubing and charged branch.

QS to male-thread flow Non-return function 0.1 bar opening differential

2. Preventing Cross-feed between Air Supplies

A circuit feeds a common pneumatic volume from separately controlled branches and needs to oppose flow back into a lower-pressure branch. A check valve in each appropriately arranged inlet provides the non-return function. This screw-in version supplies a QS-10 tubing interface, R3/8 component connection and 1700 l/min nominal flow rating for evaluating an individual branch connection.

Problem Solved

Directional check action opposes cross-feed into the connected supply branch, allowing a multi-branch circuit to use passive flow boundaries at its individual inlets.

Non-return function 1700 l/min nominal R3/8 screw-in

3. Directional Flow in a Vacuum Branch

A vacuum circuit needs a passive valve that permits evacuation flow in one direction and opposes return flow when the pressure relationship changes. The documented −1 to 10 bar operating range includes negative pressure, while the HB direction runs from QS tubing toward the threaded port. The vacuum source and branch are arranged to use that permitted direction and the stated differential-pressure requirements.

Problem Solved

The passive non-return element provides a defined directional flow path in the vacuum circuit, using the documented negative-pressure range and differential-pressure behavior of the exact valve.

−1 bar range limit Passive non-return Defined flow direction
Select your currency