SICK 7902924 IM12-02BNP-ZC1 NPN Inductive Sensor

USD 57.20

IM12-02BNP-ZC1 offers 2 mm nominal inductive sensing, flush M12 mounting, complementary NPN outputs, 2,000 Hz switching and a four-pin M12 connector.

SKU SICK-7902924 Category
SICK IM Standard

SICK IM12-02BNP-ZC1 NPN Inductive Proximity Sensor

BrandSICK
Model IdentifierIM12-02BNP-ZC1
Official Part Number7902924

Technical Overview

The SICK IM12-02BNP-ZC1 is a standard-design inductive proximity sensor with a threaded M12 × 1 housing for flush installation. Its nominal sensing range is 2 mm, with complementary NPN outputs and a 2,000 Hz switching frequency. A four-pin M12 connector carries supply and normally-open/normally-closed signals to external machine control. The 10–30 V DC device draws no more than 20 mA without load and supports output current up to 100 mA. A nickel-plated brass housing and plastic sensing face provide IP68 protection. The housing length is 65 mm, thread length is 39 mm and maximum tightening torque is 10 Nm; operating temperature is −25 to +70 °C.

Flush M12 inductive sensor with 2 mm nominal range, complementary NPN outputs, 2,000 Hz switching and four-pin M12 connection.

Key Features

  • Standard-design M12 × 1 inductive sensor; flush mounting
  • 2 mm nominal sensing range
  • Complementary NPN outputs; four-wire DC connection
  • 2,000 Hz switching frequency
  • M12 four-pin connector; normally-open and normally-closed signals
  • 10–30 V DC; ≤20 mA without load; output ≤100 mA
  • Nickel-plated brass housing; plastic sensing face
  • 65 mm housing length; 39 mm thread length; maximum 10 Nm tightening torque
  • Two mounting nuts; 17 mm across flats
  • IP68; −25 to +70 °C operating temperature

Detect a presented metal target without contact and provide complementary NPN switching states to external machine control.

Technical Specification Matrix

ParameterValue
Functional principleInductive proximity sensing
Mechanical designStandard design, M12 × 1 threaded housing
InstallationFlush
Nominal sensing range Sn2 mm
Switching outputNPN, complementary
Switching frequency2,000 Hz
ConnectionM12 four-pin connector
Electrical designDC, four-wire
Pin assignment1 BN=L+; 2 WH=normally closed; 3 BU=M; 4 BK=normally open
Power supply10–30 V DC
Residual ripple≤10% of supply voltage
Voltage drop≤1.2 V at maximum output current
No-load current≤20 mA
Output current≤100 mA
Time delay before availability≤100 ms
Hysteresis2–10% of real sensing range Sr
Repeatability≤5% of Sr at constant supply voltage and ambient temperature
Temperature drift±10% of Sr
Short-circuit protectionYes
Reverse-polarity protectionYes
Power-up pulse protectionYes
Housing materialNickel-plated brass
Sensing face materialPlastic
Housing length65 mm
Thread length39 mm
Tightening torqueMaximum 10 Nm
Items suppliedTwo mounting nuts; 17 mm across flats
IP ratingIP68
Operating temperature−25 to +70 °C
EMCEN 60947-5-2
Shock resistance30 g, 11 ms
Vibration resistance10–55 Hz, 1 mm

Industrial Applications

1. Confirming a metal stop at an assembly fixture

An assembly fixture can present a metal stop to the flush sensing face at a commissioned gap within the nominal 2 mm range. Complementary NPN outputs give external sequencing logic normally-open and normally-closed conditions for the presented target. Setup checks actual metal, mounting geometry and positioning variation throughout the intended fixture movement and operating conditions.

Problem Solved

A metal-stop reference helps external fixture logic recognize the presented mechanism position, using contactless sensing and complementary electrical conditions at a commissioned target gap.

Metal stop Flush mounting Complementary NPN

2. Counting separated metal features on a rotating member

A machine can present separated metal features past the sensing face and feed the NPN switching transitions to external counting logic. The 2,000 Hz switching specification provides a timing reference for commissioning the actual feature width, clear gap and rotational speed. Mechanical installation maintains a qualified target gap and respects the M12 flush-mounting arrangement.

Problem Solved

Repeated target transitions give external counting logic a reference for tracking separated metal features, supporting event counting through a known mechanical arrangement and validated timing.

Metal-feature counting 2,000 Hz External counter

3. Checking a metal carrier at a transfer position

A transfer station can present a metal carrier tab at a fixed inspection point and sample the complementary NPN outputs after the carrier settles. The flush-mounted housing fits a qualified metal bracket arrangement, while the M12 connector connects supply and both switching signals. External control applies its own dwell timing to distinguish a passing tab from a carrier remaining at the station.

Problem Solved

A carrier-tab presence reference helps external transfer logic recognize sustained occupancy at a fixed position, supporting coordinated release when the monitored carrier has cleared.

Carrier occupancy M12 connection External dwell timing
Select your currency