SICK 7900093 IM18-12NPS-ZW1 PNP Inductive Proximity Sensor

USD 79.04

IM18-12NPS-ZW1 provides 12 mm nominal metal sensing, non-flush M18 mounting, 300 Hz switching, PNP NO output and a 2 m PVC cable.

SKU SICK-7900093 Category
SICK IM Standard

SICK IM18-12NPS-ZW1 PNP Inductive Proximity Sensor

BrandSICK
Model IdentifierIM18-12NPS-ZW1
Official Part Number7900093

Technical Overview

The SICK IM18-12NPS-ZW1 is an M18 inductive proximity sensor with a PNP normally open output and DC three-wire wiring. Its electromagnetic sensing principle detects metal targets without requiring an optical path or separate reflector. The nominal sensing range is 12 mm; the actual target material, geometry and installed gap must be qualified. The non-flush mounting arrangement and M18 × 1 threaded nickel-plated brass housing define installation in the machine fixture. The sensor provides 300 Hz switching and operates from 10–30 V DC, with a 2 m three-wire PVC cable, a plastic sensing face and IP67 protection.

Non-flush M18 inductive sensor with 12 mm nominal range, PNP normally open output, 300 Hz switching and 2 m three-wire PVC cable.

Key Features

  • Inductive proximity sensing for metal targets
  • 12 mm nominal sensing range
  • Non-flush installation; M18 × 1 threaded housing
  • PNP normally open output; DC three-wire wiring
  • 300 Hz switching frequency
  • 10–30 V DC operation; ≤10% residual ripple
  • Continuous output current ≤400 mA
  • Nickel-plated brass housing; plastic sensing face
  • IP67; −25 to +70 °C operating range
  • 2 m three-wire PVC cable

Detect nearby metal targets without contact using non-flush M18 mounting and a PNP normally open switching signal.

Technical Specification Matrix

ParameterValue
Functional principleInductive proximity sensing of metal targets
Housing formMetric cylindrical, standard design
Thread sizeM18 × 1
Housing diameter18 mm
Nominal sensing range Sn12 mm
Installation typeNon-flush
Switching frequency300 Hz
Switching outputPNP
Output functionNormally open (NO)
Electrical wiringDC 3-wire
ConnectionCable, 3-wire, 2 m
Power supply10–30 V DC
Residual ripple≤10%
Voltage drop≤1 V at maximum output current
Time delay before availability≤100 ms
Hysteresis2–15%
Reproducibility≤5% of Sr at constant supply and ambient temperature
Temperature drift±10% of Sr
Continuous output current≤400 mA
Housing materialBrass, nickel-plated
Sensing face materialPlastic
Housing length50 mm
Thread length32 mm
Maximum tightening torque30 Nm
IP ratingIP67 according to EN 60529
Operating temperature−25 to +70 °C
EMCEN 60947-5-2
Shock and vibration resistance30 g, 11 ms / 10–55 Hz, 1 mm
Cable jacket materialPVC
Conductor cross-section0.34 mm²
MTTFD93 years
Diagnostic coverage DCavg0%

Industrial Applications

1. Confirming a metal part in a fixture

A machining fixture can place the sensor beside the expected location of a metal part so the target enters its qualified sensing zone when seated. Non-flush installation requires the sensing end to project beyond the surrounding mounting surface, and the PNP normally open output provides the presence signal. Actual target material and geometry must be qualified for the installed gap.

Problem Solved

A contactless metal-presence signal helps the sequence controller identify an occupied fixture position before the next operation, avoiding a mechanical feeler pressing against the seated part.

Non-flush mounting PNP NO Metal presence

2. Counting metal tabs on a rotating mechanism

A rotating mechanism can present separated metal tabs to the M18 sensing face and count each normally open output transition. The 300 Hz switching frequency supports repeated passages within the documented limits. Tab geometry, spacing, operating gap and target material must be qualified so consecutive targets produce distinct switching events.

Problem Solved

Discrete tab passages provide the controller with a pulse count related to mechanism rotation, supporting cycle counting without an optical beam or contacting follower on the moving tabs.

300 Hz Inductive PNP NO

3. Confirming a shuttle at a transfer position

A shuttle can carry a metal flag that enters the sensor’s local detection zone at a transfer position. The M18 thread supports fixed installation, while the normally open PNP signal reports the flag state. IP67 protection and the nickel-plated brass body support exposed machine placement.

Problem Solved

A local position-confirmation signal helps the controller coordinate transfer sequencing when the metal flag reaches the monitored point, without a mechanical switch actuator following each shuttle movement.

M18 thread IP67 Metal flag
Select your currency