1. Checking a rotary table reference position
A rotary indexing table can present a qualified metal feature to the sensing face at the required transfer position. The two OSSDs convey the local position condition to a suitable safety control system. For steel FE360, the 3.2 mm assured switch-on and 6 mm assured switch-off distances define the guaranteed state regions used in the mechanical design.
Problem Solved
The local position signal helps the safety control system evaluate whether the table is at its designated transfer reference before permitting the associated material-handling operation.
Rotary table
Two OSSDs
Assured distances
2. Monitoring a metal load carrier on a transport platform
A transport platform can position a qualified metal feature on its load carrier near the inductive sensing surface. The safety controller evaluates both self-monitoring OSSDs as a local carrier-presence condition. The 4 mm nominal range applies to steel FE360, and the final target material, mounting geometry and switching distances must follow the manufacturer operating instructions.
Problem Solved
A safety-related carrier-presence input supports the controller in recognizing an absent carrier at the monitored support point before it permits the transport action defined by the machine design.
Carrier presence
Inductive
Safety control
3. Monitoring a metal access-cover position
A metal access cover can carry an intended actuator feature that enters the switch response region when the cover reaches its defined position. The uncoded inductive switch supplies two OSSDs to the safety control system. The installation must prevent unintended actuation by other metal objects, and the controller evaluates this local position signal within the complete protective arrangement.
Problem Solved
The cover-position signal provides the safety controller with a noncontact state input for its access-monitoring function, without requiring a mechanical plunger to touch the cover during each cycle.
Access-cover position
Uncoded
OSSD