Sale!

Festo 10166 Solenoid Valve Body, 5/2 Double, G1/2, F Coils

Original price was: USD 232.44.Current price is: USD 199.94.

Double-solenoid poppet-seat valve body with 4500 l/min nominal flow, 2–8 bar range, 20 ms reversal time and separately ordered F solenoid coils.

SKU Festo-10166 Category
Festo Solenoid Valves

Festo JMFH-5-1/2 Solenoid Valve Body

BrandFesto
Model IdentifierJMFH-5-1/2
Official Part Number10166

Technical Overview

The Festo JMFH-5-1/2 is a piloted, double-solenoid 5/2-way valve body with a soft-sealing poppet-seat design. All five pneumatic ports use G1/2 connections, with 4500 l/min standard nominal flow across a 2–8 bar operating range. The F solenoid coils are ordered separately, so voltage and power depend on the selected coils. Detenting manual override and throttleable exhaust support circuit setup, with a 20 ms reversal time and 25 Hz maximum switching frequency. The 1210 g die-cast aluminium body uses NBR/TPE-U seals, M5 pilot-exhaust ports 82 and 84, and manifold-rail or through-hole mounting in any position.

G1/2 double-solenoid 5/2 valve body with 4500 l/min nominal flow, 20 ms reversal time and separately ordered F coils.

Key Features

  • Double-solenoid 5/2-way poppet-seat function
  • Piloted electrical actuation with two solenoid command positions
  • G1/2 connections at ports 1, 2, 3, 4 and 5
  • 4500 l/min standard nominal flow to DIN 1343
  • F solenoid coils and electrical connections ordered separately
  • 2–8 bar operating range and non-reversible flow direction
  • 20 ms reversal time and 25 Hz maximum switching frequency
  • Detenting manual override and throttleable exhaust
  • 52 mm construction width, 69 mm mounting grid pitch and M5 pilot-exhaust ports 82/84
  • 1210 g die-cast aluminium body with NBR/TPE-U seals; manifold-rail or through-hole mounting

Route a double-acting pneumatic circuit through G1/2 ports with 4500 l/min nominal flow and separately selected F coils.

Technical Specification Matrix

ParameterValue
Valve function5/2-way, double solenoid
Type of actuationElectrical
Construction width52 mm
Standard nominal flow rate (standardised to DIN 1343)4500 l/min
pneumatic working portG1/2
Operating voltageVia solenoid coil, must be ordered separately
Operating pressure0.2 MPa...0.8 MPa; 2 bar...8 bar
DesignPoppet seat
Approvalc UL us - Recognised (Oil)
Degree of protectionIP65
Nominal size14 mm
Mounting grid pitch69 mm
Exhaust-air functionCan be throttled
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting
Type of pilotingPiloted
Flow directionNon-reversible
lapUnderlap
b value0.3
C value19.5 l/sbar
Max. switching frequency25 Hz
Switching time reversal20 ms
Max. positive test pulse with 0 signal2200 µs
Max. negative test pulse with 1 signal3700 µs
Characteristic coil dataSee solenoid coil, to be ordered separately
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Storage temperature-20 °C...60 °C
Media temperature-10 °C...60 °C
Ambient temperature-5 °C...40 °C
Physical Weight (kg)1.21
Electrical connectionVia F coil, to be ordered separately
Type of mountingEither:; On manifold rail; With through-hole
Pilot exhaust port 82M5
Pilot exhaust port 84M5
Pneumatic connection, port 1G1/2
Pneumatic connection, port 2G1/2
Pneumatic connection, port 3G1/2
Pneumatic connection, port 4G1/2
Pneumatic connection, port 5G1/2
Note on materialsRoHS compliant
Material sealsNBR; TPE-U(PU)
Material housingDie-cast aluminium

Industrial Applications

1. Double-Acting Cylinder Direction Control

A transfer fixture needs to alternate pressure and exhaust between the two chambers of a double-acting cylinder. The valve's double-solenoid 5/2 function provides the two routing states, with a double-solenoid actuation arrangement. G1/2 connections and 4500 l/min standard nominal flow define the pneumatic interface, while separately ordered F coils establish the electrical actuation configuration.

Problem Solved

The five-port routing function supplies the cylinder directional pressure and exhaust paths, with two electrical actuation positions providing the command interface for the pneumatic sequence.

5/2 double solenoid Two solenoid commands G1/2 ports

2. Exhaust-Flow Setup for a Pneumatic Mechanism

A pneumatic mechanism needs its exhaust path arranged to suit the intended motion behaviour. Festo specifies that this valve's exhaust can be throttled, allowing appropriate external flow-control components in the surrounding circuit. The 2–8 bar working range and non-reversible flow direction define the valve conditions, while the actuator load and installed restriction determine the resulting motion.

Problem Solved

Throttleable exhaust permits flow-control elements to shape the connected mechanism's exhaust behaviour, providing a defined routing component for tuning the pneumatic motion in its intended flow direction.

Throttleable exhaust 2–8 bar Non-reversible flow

3. Local Routing Checks during Commissioning

During machine commissioning, a technician needs to exercise the valve's pneumatic routing at the component before completing the sequence setup. The detenting manual override provides local actuation, while manifold-rail or through-hole mounting locates the body in the assembly. A 20 ms reversal time and 25 Hz maximum switching frequency characterise the valve component for the subsequent electrical sequence.

Problem Solved

A local manual override lets the technician exercise the valve routing during setup, while the documented mounting and switching data support integration into the machine's pneumatic sequence.

Detenting override 20 ms reversal Manifold or through-hole
Select your currency