SICK 1062203 KTM-MB31191P PNP/NPN Contrast Sensor

USD 156.52

White-light contrast sensing with manual potentiometer adjustment, separate PNP and NPN outputs, 10 kHz switching, 50 µs response and an M8 connector.

SKU SICK-1062203 Category
SICK KTM Core

SICK KTM-MB31191P White-Light PNP/NPN Contrast Sensor

BrandSICK
Model IdentifierKTM-MB31191P
Official Part Number1062203

Technical Overview

The SICK KTM-MB31191P is a compact white-LED contrast sensor with separate PNP and NPN switching outputs. A potentiometer sets the switching threshold by comparing a mark with its background; this version permits adjustment by hand or screwdriver. A separate rotary control selects light or dark switching. Its round Ø2 mm light spot is specified at 12.5 mm, with light emission from the long housing side and a sensing-distance tolerance of ±3 mm. The sensor combines 10 kHz switching, 50 µs response, an M8 four-pin male connector and an IP67 ABS housing with PMMA optics for machine integration.

White-light contrast sensor with manual threshold potentiometer, separate PNP/NPN outputs, 10 kHz switching, 50 µs response and M8 four-pin connector.

Key Features

  • White LED; round Ø2 mm spot at 12.5 mm
  • Sensing distance ≤12.5 mm with ±3 mm tolerance
  • Long-side light emission; no receiving filter
  • Threshold potentiometer adjustable by hand or screwdriver
  • Separate rotary control for light/dark switching
  • PNP output on pin 4 and NPN output on pin 2
  • 10 kHz switching; 50 µs response and 25 µs jitter
  • Maximum total output current 50 mA
  • M8 four-pin male connector; 12–24 V DC nominal supply
  • IP67 ABS housing and PMMA optics

Set the contrast threshold by hand or screwdriver and select light/dark switching while providing separate PNP and NPN machine signals.

Technical Specification Matrix

ParameterValue
Functional principleOptical contrast detection
Housing designSmall
Light sourceLED, White
Light emissionLong side of housing
Light spot sizeØ2 mm at 12.5 mm
Light spot directionRound
Receiving filterNone
Sensing distance≤12.5 mm; tolerance ±3 mm
AdjustmentSwitching-threshold potentiometer; adjustable by hand or screwdriver
Switching modeLight/dark switching selectable by separate rotary switch
IndicatorsGreen LED: power on; yellow LED switching indication; yellow LED equals Q in dark switching and differs from Q in light switching
Power supply12–24 V DC; limit values 12 V −10% to 24 V +20%; short-circuit-protected network max. 8 A
Residual ripple≤5 Vpp; remain within supply tolerances
Current consumption<50 mA without load
Switching frequency10 kHz at light/dark ratio 1:1
Response time50 µs
Jitter25 µs
Switching outputSeparate PNP and NPN outputs
Output current50 mA maximum, total of all outputs
Time delayNone
ConnectionM8 four-pin male connector
Pin assignment1/BN: L+; 2/WH: Q NPN; 3/BU: M; 4/BK: Q PNP
Protection classIII
Circuit protectionSupply reverse-polarity protection, output Q short-circuit protection and interference-pulse suppression
Housing materialABS plastic
Optics materialPMMA plastic
IP ratingIP67
Operating temperature−10 to +55 °C
Storage temperature−20 to +75 °C
Shock resistanceAccording to IEC 60068
UL fileNRKH.E348498 and NRKH7.E348498
Average LED service life100,000 h at ambient temperature +25 °C
Dimensions L x W x H (cm)2.1 x 1.2 x 3.15
Physical Weight (kg)0.02
NPN output voltageHIGH approximately supply voltage; LOW ≤2 V

Industrial Applications

1. Registering a printed packaging web

A packaging web can carry a contrasting registration mark past the sensor at the specified sensing distance. The manual potentiometer sets the threshold between the mark and background, after which each qualified optical transition provides a switching event. The 10 kHz switching frequency and 50 µs response define timing limits for the machine controller to evaluate during commissioning.

Problem Solved

A qualified print-mark event gives the controller a repeatable optical reference for web positioning, helping coordinate the feed cycle with printed artwork after actual material contrast has been tested.

Print registration 10 kHz Contrast sensing

2. Checking a printed label at an inspection point

A label-handling station can direct the light spot at a designated printed patch while the label is held in a controlled position. The manual potentiometer sets the threshold between the mark and background. A compatible controller reads the PNP or NPN switching signal to distinguish the qualified printed patch from the exposed background at that local inspection point.

Problem Solved

A local contrast check identifies whether the expected printed patch is present at the inspection point, allowing the controller to flag missing or misplaced labels without mechanical contact.

Label inspection PNP Printed patch

3. Indexing contrasting sections on a rotary carrier

A rotary carrier can present alternating light and dark reference patches to the sensor while keeping the surface within the specified sensing distance. Each qualified transition changes the PNP or NPN output for the local control input. The documented response time limits detection latency, and the IP67 housing supports installation near the machine mechanism.

Problem Solved

Contrasting reference patches provide discrete angular indexing events for a compatible controller, helping identify expected carrier positions without a contact cam switch at the monitored surface.

Rotary indexing PNP IP67
Select your currency