SICK 1078048 KTM-MB31194P PNP/NPN Contrast Sensor

USD 67.34

KTM-MB31194P offers white-light contrast sensing, PNP and NPN outputs, potentiometer adjustment, 10 kHz switching and a 2 m cable in an IP67 housing.

SKU SICK-1078048 Category
SICK KTM Core

SICK KTM-MB31194P White-Light PNP/NPN Contrast Sensor

BrandSICK
Model IdentifierKTM-MB31194P
Official Part Number1078048

Technical Overview

The SICK KTM-MB31194P is a compact white-light contrast sensor with PNP and NPN switching outputs. It distinguishes a print mark from its background using a manually set switching threshold, while a rotary control selects light or dark switching. Emission from the long housing side produces a round 2 mm spot at 12.5 mm; the specified sensing distance is up to 12.5 mm with ±3 mm tolerance. The sensor provides 10 kHz switching, 50 µs response and 25 µs jitter. A 2 m open-ended four-wire cable, 12–24 V DC supply and IP67 ABS housing support installation in compact machine spaces.

White-light contrast sensor with PNP and NPN outputs, manual threshold adjustment, up to 12.5 mm sensing distance, 10 kHz switching and a 2 m cable.

Key Features

  • White LED contrast sensing in a small housing
  • Sensing distance ≤12.5 mm with ±3 mm tolerance
  • Round Ø2 mm spot at 12.5 mm
  • Light emission from the long housing side
  • Threshold potentiometer adjustable by hand or screwdriver
  • Light/dark switching selected by rotary control
  • PNP and NPN outputs; total output current ≤50 mA
  • 10 kHz switching; 50 µs response and 25 µs jitter
  • 12–24 V DC supply; 2 m open-ended four-wire cable
  • IP67 ABS housing with PMMA optics; 20 g product weight

Set the contrast threshold locally and provide PNP and NPN signals from a compact sensor with a round white-light spot.

Technical Specification Matrix

ParameterValue
Functional principleOptical contrast detection
Housing designSmall
Light sourceLED, white light
Light emissionLong side of housing
Light spot sizeØ2 mm at 12.5 mm
Light spot directionRound
Receiving filterNone
Sensing distance≤12.5 mm; tolerance ±3 mm
AdjustmentSwitching-threshold potentiometer; adjustable by hand or screwdriver
Switching modeLight/dark switching, selectable by rotary control
IndicatorsGreen LED: power on; yellow LED: switching-output indication; light switching LED state differs from Q, dark switching LED state matches Q
Power supply12–24 V DC; limit values 12 V −10% to 24 V +20%; short-circuit-protected network max. 8 A
Residual ripple≤5 Vpp; remain within supply tolerances
Current consumption<50 mA without load
Switching frequency10 kHz at light/dark ratio 1:1
Response time50 µs
Jitter25 µs
Switching outputPNP and NPN
NPN output voltageHIGH approximately supply voltage; LOW ≤2 V
Output current50 mA maximum, total of all outputs
Time delayNone
ConnectionOpen-ended 4-wire cable, 2 m
Wire assignmentBN/1: L+; WH/2: NPN Q; BU/3: M; BK/4: PNP Q
Protection classIII
Circuit protectionSupply reverse-polarity protection, output Q short-circuit protection and interference-pulse suppression
Housing materialABS plastic
Optics materialPMMA plastic
IP ratingIP67
Operating temperature−10 to +55 °C
Storage temperature−20 to +75 °C
Shock resistanceAccording to IEC 60068
UL fileNRKH.E348498 and NRKH7.E348498
Dimensions L x W x H (cm)2.1 x 1.2 x 3.15
Physical Weight (kg)0.02

Industrial Applications

1. Registering a printed packaging web

A packaging web can carry a contrasting registration mark past the sensor at the specified sensing distance. The potentiometer sets a threshold between mark and background, after which each qualified optical transition provides a switching event. The 10 kHz switching frequency and 50 µs response define timing limits for the machine controller to evaluate during commissioning.

Problem Solved

A qualified print-mark event gives the controller a repeatable optical reference for web positioning, helping coordinate the feed cycle with printed artwork after actual material contrast has been tested.

Print registration 10 kHz Contrast sensing

2. Checking a printed label at an inspection point

A label-handling station can direct the light spot at a designated printed patch while the label is held in a controlled position. The potentiometer sets a threshold between mark and background. A compatible controller reads the PNP or NPN switching signal to distinguish the qualified printed patch from the exposed background at that local inspection point.

Problem Solved

A local contrast check identifies whether the expected printed patch is present at the inspection point, allowing the controller to flag missing or misplaced labels without mechanical contact.

Label inspection PNP or NPN Printed patch

3. Indexing contrasting sections on a rotary carrier

A rotary carrier can present alternating light and dark reference patches to the sensor while keeping the surface within the specified sensing distance. Each qualified transition changes the PNP or NPN output for the local control input. The documented response time limits detection latency, and the IP67 housing supports installation near the machine mechanism.

Problem Solved

Contrasting reference patches provide discrete angular indexing events for a compatible controller, helping identify expected carrier positions without a contact cam switch at the monitored surface.

Rotary indexing PNP or NPN IP67
Select your currency