input
type of the power supply network	1-phase AC or DC
supply voltage at AC
● minimum rated value	100 V
● maximum rated value	240 V
● initial value	85 V
● full-scale value	264 V
input voltage at DC	110 … 300 V
wide range input	Yes
overvoltage overload capability	300 V AC for 1 s
buffering time for rated value of the output current in the event of power failure minimum	40 ms
operating condition of the mains buffering	at Vin = 187 V
line frequency	50/60 Hz
line frequency	47 … 63 Hz
input current
● at rated input voltage 120 V	0.71 A
● at rated input voltage 230 V	0.37 A
current limitation of inrush current at 25 °C maximum	50 A
I2t value maximum	3 A²·s
fuse protection type	internal
fuse protection type in the feeder	Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C
output
voltage curve at output	Controlled, isolated DC voltage
output voltage at DC rated value	5 V
output voltage
● at output 1 at DC rated value	5 V
output voltage adjustable	Yes; via potentiometer
adjustable output voltage	4.6 … 5.4 V
relative overall tolerance of the voltage	3 %
relative control precision of the output voltage
● on slow fluctuation of input voltage	0.1 %
● on slow fluctuation of ohm loading	0.1 %
residual ripple
● maximum	100 mV
● typical	30 mV
voltage peak
● maximum	100 mV
● typical	50 mV
display version for normal operation	Green LED for output voltage OK
behavior of the output voltage when switching on	No overshoot of Vout (soft start)
response delay maximum	0.5 s
voltage increase time of the output voltage
● typical	100 ms
output current
● rated value	6.3 A
● rated range	0 … 6.3 A; +55 … +70 °C: Derating 2%/K
supplied active power typical	31.5 W
bridging of equipment	Yes
number of parallel-switched equipment resources for increasing the power	2
efficiency
efficiency in percent	79.8 %
power loss [W]
● at rated output voltage for rated value of the output current typical	8 W
● during no-load operation maximum	0.3 W
closed-loop control
relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical	0.2 %
relative control precision of the output voltage at load step of resistive load 10/90/10 % typical	7 %
setting time
● load step 10 to 90% typical	1 ms
● load step 90 to 10% typical	1 ms
protection and monitoring
design of the overvoltage protection	Yes, according to EN 60950-1
property of the output short-circuit proof	Yes
design of short-circuit protection	Constant current characteristic
● typical	8.2 A
overcurrent overload capability
● when switching on	150% Iout rated typ. 200 ms
● in normal operation	overload capability 150% Iout rated typ. 200 ms
enduring short circuit current RMS value
● maximum	8.2 A
measuring point for output current	Yes; 50 mV =^ 6.3 A
safety
galvanic isolation between input and output	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
operating resource protection class	Class II (without protective conductor)
protection class IP	IP20
EMC
standard
● for emitted interference	EN 55022 Class B
● for mains harmonics limitation	not applicable
● for interference immunity	EN 61000-6-2
standards, specifications, approvals
certificate of suitability
● CE marking	Yes
● UL approval	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus- Recognized (UL 60950, CSA C22.2 No. 60950), File E151273
● CSA approval	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus- Recognized (UL 60950, CSA C22.2 No. 60950), File E151273
● EAC approval	Yes
● NEC Class 2	No
● SEMI F47	Yes
type of certification
● CB-certificate	Yes
MTBF at 40 °C	2 654 280 h
standards, specifications, approvals hazardous environments
certificate of suitability
● IECEx	No
● ATEX	No
● ULhazloc approval	No
● cCSAus, Class 1, Division 2	No
● FM registration	No
standards, specifications, approvals marine classification
shipbuilding approval	Yes
Marine classification association
● American Bureau of Shipping Europe Ltd. (ABS)	Yes
● French marine classification society (BV)	Yes
● Det Norske Veritas (DNV)	Yes
● Lloyds Register of Shipping (LRS)	Yes
standards, specifications, approvals Environmental Product Declaration
Environmental Product Declaration	Yes
global warming potential [CO2 eq]
● total	222.9 kg
● during manufacturing	3.8 kg
● during operation	218.9 kg
● after end of life	0.14 kg
ambient conditions
ambient temperature
● during operation	-25 … +70; with natural convection
● during transport	-40 … +85
● during storage	-40 … +85
environmental category according to IEC 60721	Climate class 3K3, 5 … 95% no condensation
connection method
type of electrical connection	screw terminal
● at input	L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded
● at output	+, -: 1 screw terminal each for 0.5 … 2.5 mm²
● for auxiliary contacts	–
mechanical data
width × height × depth of the enclosure	54 × 90 × 53 mm
installation width × mounting height	54 mm × 130 mm
required spacing
● top	20 mm
● bottom	20 mm
● left	0 mm
● right	0 mm
fastening method	Snaps onto DIN rail EN 60715 35×7.5/15, direct mounting in different mounting positions
● DIN-rail mounting	Yes
● S7 rail mounting	No
● wall mounting	Yes
housing can be lined up	Yes
net weight	0.2 kg