1. Pressure Setting for a Light Clamping Fixture
A pneumatic assembly fixture needs a reduced working pressure for handling parts that require a light clamp setting. The 0.1–10 bar regulation range provides low-pressure adjustment at the fixture branch, while the piloted diaphragm design maintains the output-pressure function. The specified 0.02 bar maximum hysteresis characterises the regulator's pressure-setting behaviour without implying a complete fixture force-accuracy rating.
Problem Solved
Local pressure reduction provides the clamp circuit with a suitable adjustment range, while the documented hysteresis helps characterise the regulator response during changes to the working-pressure setting.
0.1–10 bar
0.02 bar maximum hysteresis
G1/4 ports
2. Lowering a Test-Line Pressure Between Recipes
A pneumatic test station changes its downstream pressure between test recipes. The regulator's secondary-exhausting function gives the regulated side a relief path when the setpoint is reduced. A detented rotary knob provides manual adjustment, and the prepared G1/8 connection allows a separately selected pressure gauge to be incorporated into the test-line arrangement.
Problem Solved
Secondary exhausting allows retained downstream pressure to decrease during a lower setpoint adjustment, supporting recipe changes through the same regulator used to establish the test pressure.
Secondary exhausting
Detented knob
G1/8 gauge preparation
3. Regulated Inert-Gas Feed to a Process Fixture
A process fixture requires a reduced-pressure inert-gas feed rather than a direct connection to the upstream line. Festo lists inert gas as an operating medium for this regulator, alongside unlubricated compressed air. The G1/4 ports connect the regulated branch, and the 1–12 bar inlet and 0.1–10 bar output-setting ranges define its pressure-control envelope.
Problem Solved
The regulator provides documented inert-gas pressure-reduction capability at the fixture feed, combining a defined input-pressure range with local output adjustment in one diaphragm-controlled component.
Inert-gas medium
1–12 bar inlet
0.1–10 bar regulation