Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.

Commercial Data

Item number	2865625
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	DK111Z
Catalog page	Page 175 (C-5-2019)
GTIN	4046356324618
Weight per piece (including packing)	162.8 g
Weight per piece (excluding packing)	162.8 g
Customs tariff number	85437090
Country of origin	DE

Product Properties

Product type	Feed-in module
Product family	MACX Analog

Electrical Properties

Electrical isolation
Overvoltage category	II
Pollution degree	2
Electrical isolation Input/switching output
Rated insulation voltage	50 V AC/DC
Supply
Nominal supply voltage	24 V DC

Input Data

Signal
Voltage input signal	19.2 V DC … 30 V DC (24 V DC, -20 % … +25 %)
Fuse	5 A (replaceable), slow-blow 250 V AC
Polarization and surge protection	Yes

Output Data

Switching: Relay
Contact switching type	1 changeover contact
Contact material	Gold (Au)
Maximum switching voltage	50 V AC (2 A)
	30 V DC (2 A)
	50 V DC (0.22 A)
Signal
Max. current output signal	3.75 A
Output voltage	Input voltage – max 0.8 V at 3.75 A

Connection Data

Connection method	Screw connection
Stripping length	7 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² … 2.5 mm²
Conductor cross section flexible	0.2 mm² … 2.5 mm²
Conductor cross section AWG	24 … 14
Tightening torque	0.5 Nm … 0.6 Nm

Ex Data

Ex installation (EPL)	Gc
	Div. 2

Signaling

Status display	1 x red LED (error)
	2x green LEDs (PWR1 and PWR2)

Dimension

Width	17.5 mm
Height	112.5 mm
Depth	113.7 mm
Depth NS 35/7,5	114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Material Specifications

Color	gray (RAL 7042)
Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-40 °C … 60 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C … 80 °C
Permissible humidity (operation)	5 % … 95 % (non-condensing)
Altitude range (≤ 2000 m)
Altitude	≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient temperature (operation)	-40 °C … 60 °C
Rated insulation voltage	50 V AC/DC
Altitude range (≤ 3000 m)
Height range	> 2000 m … 3000 m
Ambient temperature (operation)	-40 °C … 54 °C
Rated insulation voltage	40 V AC/DC
Altitude range (≤ 4000 m)
Height range	> 3000 m … 4000 m
Ambient temperature (operation)	-40 °C … 48 °C
Rated insulation voltage	30 V AC/DC
Altitude range (≤ 5000 m)
Height range	> 4000 m … 5000 m
Ambient temperature (operation)	-40 °C … 42 °C
Rated insulation voltage	30 V AC/DC

Approvals

CE
Certificate	CE-compliant
ATEX
Identification	 II 3 G Ex ec nC IIC T4 Gc
Certificate	PxCIF08ATEX2865625X
IECEx
Identification	Ex ec nC IIC T4 Gc
Certificate	IECEx IBE 08.0004X
CCC / China-Ex
Identification	Ex ec nC IIC T4 Gc
Certificate	2021122303114198
UL, USA/Canada
Identification	UL 61010 Listed
	Class I, Div. 2, Groups A, B, C, D T4
	Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate	DNV GL TAA0000AG
Shipbuilding data
Temperature	B
Humidity	B
Vibration	A
EMC	B
Enclosure	Required protection according to the Rules shall be provided upon installation on board

EMC Data

Electromagnetic compatibility	Conformance with EMC directive
Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Noise emission
Standards/regulations	EN 61000-6-4
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Evaluation criterion	A
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Evaluation criterion	A
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Evaluation criterion	A