Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.

Commercial Data

Item number	2695439
Packing unit	10 pc
Minimum order quantity	10 pc
Product key	ACHACA
Catalog page	Page 108 (C-5-2019)
GTIN	4046356447430
Weight per piece (including packing)	6.112 g
Weight per piece (excluding packing)	6 g
Customs tariff number	85366990
Country of origin	DE

Notes

Recommendation	Material of contact pads for bus connector, galvanic gold (hard gold)

Product Properties

Product type	DIN rail connector
Product family	TBUS5..2-6,2..
Pitch	3.81 mm
Pin layout	Linear pinning

Electrical Properties

Properties
Nominal current I_N	8 A
Nominal voltage U_N	125 V
Contact resistance	2.17 mΩ
Rated voltage (III/3)	125 V
Rated surge voltage (III/3)	2.5 kV
Rated voltage (III/2)	125 V
Rated surge voltage (III/2)	2.5 kV

Dimension

Pitch	3.81 mm
Width [w]	19.25 mm
Height [h]	36.3 mm
Length [l]	17.65 mm

Material Specifications

Material data – contact
Note	WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material	Cu alloy
Surface characteristics	gold-plated
Material data – housing
Color (Housing)	gray (7042)
Insulating material	PBT
Insulating material group	I
CTI according to IEC 60112	600
Flammability rating according to UL 94	V0
Temperature for the ball pressure test according to EN 60695-10-2	125 °C
material specifications – connector
Color ()	()

Mechanical Tests

Insertion and withdrawal forces
Result	Test passed
No. of cycles	25
Insertion strength per pos. approx.	2.18 N
Withdraw strength per pos. approx.	1.38 N
Polarization and coding
Specification	IEC 60512-13-5:2006-02
Result	Test passed
Visual inspection
Specification	IEC 60512-1-1:2002-02
Result	Test passed
Dimension check
Specification	IEC 60512-1-2:2002-02
Result	Test passed

Environmental and real-life conditions

Vibration test
Specification	IEC 60068-2-6:2007-12
Frequency	10 – 150 – 10 Hz
Sweep speed	1 octave/min
Amplitude	0.35 mm (10 Hz … 60.1 Hz)
Acceleration	5g (60.1 Hz … 150 Hz)
Test duration per axis	2.5 h
Test directions	X-, Y- and Z-axis (pos. and neg.)
Durability test
Specification	IEC 60512-9-1:2010-03
Impulse withstand voltage at sea level	2.9 kV
Contact resistance R₁	2.17 mΩ
Contact resistance R₂	2.26 mΩ
Insertion/withdrawal cycles	25
Climatic test
Specification	DIN 50018:2013-05
Corrosive stress	0.2 dm³SO₂on 300 dm³/40 °C/1 cycle
Thermal stress	100 °C/168 h
Power-frequency withstand voltage	1.4 kV
Shocks
Specification	IEC 60068-2-27:2008-02
Pulse shape	Semi-sinusoidal
Acceleration	30g
Shock duration	18 ms
Test directions	X-, Y- and Z-axis (pos. and neg.)
Ambient conditions
Ambient temperature (operation)	-40 °C … 105 °C (dependent on the derating curve)
Ambient temperature (storage/transport)	-40 °C … 55 °C
Relative humidity (storage/transport)	30 % … 70 %
Ambient temperature (assembly)	-5 °C … 100 °C

Electrical Tests

Thermal test \| Test group C
Specification	IEC 60512-5-1:2002-02
Tested number of positions	5
Air clearances and creepage distances \|
Specification	IEC 60664-1:2007-04
Insulating material group	I
Rated insulation voltage (III/3)	125 V
Rated surge voltage (III/3)	2.5 kV
minimum clearance value – non-homogenous field (III/3)	1.5 mm
minimum creepage distance (III/3)	1.9 mm
Rated insulation voltage (III/2)	125 V
Rated surge voltage (III/2)	2.5 kV
minimum clearance value – non-homogenous field (III/2)	1.5 mm
minimum creepage distance (III/2)	1.5 mm