1. Interrupting Airflow to a Small Process Nozzle
A process station normally supplies a small air nozzle and needs an electrical command to interrupt its feed. The normally open 3/2-way valve supplies the unactuated flow arrangement, with direct actuation and specified 8.3 ms on/4.5 ms off component switching times. Its 200 l/min nominal flow characterizes the valve, while the nozzle response depends on the connected volume and tubing.
Problem Solved
The normally open routing supports the default feed condition, while direct electrical switching provides a defined command point for interrupting or changing that pneumatic path.
3/2 normally open
8.3 ms on / 4.5 ms off
200 l/min nominal
2. Electrical Commands to a Pneumatic Pilot Circuit
An automated fixture uses a downstream pneumatic control element and needs an electrical-to-pneumatic command stage. This direct-acting 3/2 valve switches its working path from a 24 V DC command and returns by mechanical spring. QS-6 supply, working and exhaust connections organize the valve station, while the two-pin plug defines the electrical connection.
Problem Solved
The valve converts an electrical sequence command into a pneumatic switching state, with direct actuation and mechanical spring reset providing the command stage for the downstream circuit.
Direct actuation
24 V DC
Mechanical spring reset
3. Restricted-Pressure Vacuum Path Switching
A handling circuit requires a small directional valve whose working paths can operate below atmospheric pressure. Festo permits reversible operation for this model within the restricted −0.9 to 1 bar pressure range, distinct from its ordinary −0.9 to 8 bar rating. The direct-acting design switches without a separate pilot-air pressure requirement, with QS-6 supply, working and exhaust connections providing the three pneumatic interfaces.
Problem Solved
Documented reversible low-pressure operation provides a valve basis for a vacuum-path circuit, while direct actuation avoids introducing a separate pneumatic pilot supply to switch that component.
−0.9 to 1 bar reversible
Direct-acting
Sub-base interface