1. Carton counting across a conveyor
On a conveyor carrying separated opaque cartons, the sender and receiver face each other across the belt. Each carton interrupts the red beam, producing an NPN switching signal for the machine counter. The 0–10 m sensing range accommodates wide conveyor arrangements, while the specified response below 500 µs supports detection of distinct passing edges.
Problem Solved
Beam interruption provides a count event without depending on reflected light from the carton surface, giving the conveyor controller a direct signal for tracking separated loads.
Through-beam detection
NPN output
< 500 µs
2. Monitoring material continuity on a feed line
A film or sheet feeder handling opaque material can place the optical beam across the expected material path. The received-light state changes when material runs out or a break leaves an opening in that path. Selectable light/dark switching lets the control system use the appropriate signal polarity, while sensitivity adjustment sets the receiver for the installed separation.
Problem Solved
A persistent change in beam reception identifies loss of material continuity, allowing the machine controller to respond before subsequent processing continues without material in place.
Light/dark selector
Adjustable sensitivity
Opaque material
3. Detecting accumulation at a conveyor transfer
At a transfer between conveyors, an opaque load that remains across the beam indicates that the receiving position is occupied. The sender and receiver can span the transfer area without a reflector. IP67 housings suit exposed machine locations, and the 2 m cables connect the optical pair to the local machine wiring for occupancy monitoring.
Problem Solved
The controller can distinguish a brief passing load from sustained blockage using signal duration, helping coordinate upstream release when the downstream transfer point remains occupied.
IP67
2 m cables
Through-beam occupancy