$ 165.60
| Detection range | 40 … 600 mm | ||||||||||||||
| Detection range min. | 40 … 90 mm | ||||||||||||||
| Detection range max. | 40 … 600 mm | ||||||||||||||
| Adjustment range | 90 … 600 mm | ||||||||||||||
| Reference target | standard white, 100 mm x 100 mm | ||||||||||||||
| Light source | laser diode | ||||||||||||||
| Light type | modulated visible red light | ||||||||||||||
| Laser nominal ratings | |||||||||||||||
|
|||||||||||||||
| Black-white difference (6 %/90 %) | < 5 % at 300 mm | ||||||||||||||
| Diameter of the light spot | approx. 2.5 mm at a distance of 600 mm | ||||||||||||||
| Opening angle | approx. 0.3 ° | ||||||||||||||
| Ambient light limit | EN 60947-5-2 : 70000 Lux | ||||||||||||||
| MTTFd | 560 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Operation indicator | LED green: constantly on – power on flashing (4Hz) – short circuit flashing with short break (1 Hz) – IO-Link mode |
| Function indicator | LED yellow: constantly on – object detected constantly off – object not detected |
| Control elements | Light-on/dark-on changeover switch |
| Control elements | Sensing range adjuster |
| Operating voltage | UB | 10 … 30 V DC |
| Ripple | max. 10 % | |
| No-load supply current | I0 | < 15 mA at 24 V supply voltage |
| Protection class | III |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link revision | 1.1 |
| Device profile | Identification and diagnosis Smart Sensor type 2.4 |
| Device ID | 0x111603 (1119747) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 2.3 ms |
| Process data width | Process data input 1 Bit Process data output 2 Bit |
| SIO mode support | yes |
| Compatible master port type | A |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q – Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link /Q – Pin2: NPN normally closed / dark-on, PNP normally open / light-on |
|
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA , resistive load | |
| Usage category | DC-12 and DC-13 | |
| Voltage drop | Ud | ≤ 1.5 V DC |
| Switching frequency | f | 1650 Hz |
| Response time | 300 µs |
| Communication interface | IEC 61131-9 |
| Product standard | EN 60947-5-2 |
| Laser safety | EN 60825-1:2014 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| FDA approval | IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019. |
| Ambient temperature | -40 … 60 °C (-40 … 140 °F) |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) |
| Degree of protection | IP67 / IP69 / IP69K | ||||||
| Connection | 4-pin, M12 x 1 connector, 90° rotatable | ||||||
| Material | |||||||
|
|||||||
| Mass | approx. 37 g | ||||||
| Dimensions | |||||||
|
|||||||
| Weight | 0.037 kg |
|---|---|
| Dimensions | 4.17 × 1.5 × 5.06 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penang
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
